Package Contents: 2S1P PCI Serial Parallel Combo Card with 16C550 UART
1 x Full-Profile Bracket
2 x Low-Profile Brackets (for Serial Ports)
1 x Low-Profile Bracket (for Parallel Port)
1 x Quick-Start Guide
Specifications: Main chip: NEC UPD720202 chipset
Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times;
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps
SATA to take power by the board, or you can into a small Molex 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cabl...
Operating Systems Supported: Windows 7, 8, 10,
Linux Kernel 2.6.15 and later
Android 1.x-5.x
Specifications: The Syba SI-PEX10011 PCI express Parallel Card with Asix AX99100 Chipset turns a PCI express slot into a parallel port. Works with old software that requires re-mapping to legacy address. Designed around the well known Serial/Parallel I/O power house Asix chipset. Parallel ports are ideal for connecting to modem, cellular phone, PDA, ISDN terminal adapter, satellite receiver, graphic tablet, bar code scanner, label printer, automated teller machine, GPS, finger print identification, Infra-Red transceiver, packet radio, magnetic card reader, Pops devices, multi-modem dial-up server, digital camera, automation interface, and card reader. Keeps old S...
Specifications: Industry Standards:
- USB 3.0 Specification Rev. 1.0
- USB Battery Charging Specification Rev. 1.2 (Apple Mode only)
- PCI Express Base Specification Rev. 2.0
- Intel xHCI Specification Rev. 1.0
Interface: USB 3.0
Connector Type(s): 1 - PCI Express x4 Male
External Ports: 4 - USB 3.0 A (9 pin; SuperSpeed) Female
Internal Ports:
- 1 - LP4 (4 pin; Molex Large Drive Power) Female
- 1 - SATA Power (15 pin) Plug
Maximum Cable Length: 9.8 ft [3 m]
Maximum Data Transfer Rate: 5Gbps per 2 ports - 10Gbps Total
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
Internal USB Ports: USB3.0 20PIN Internal but not USB Ports Internal,Need to work with other USB3.0 20PIN Adapter to Achieve 2x USB3.0 Ports for Front Panel