DIY Cooling

Limited time offer, ends 09/26

• Model #: 9550675441291

• Brand: Watercool
• Model: 4251312603397
• Part Number: WAT-0100
• Features: With this mounting solution, a HEATKILLER® Tube reservoir can be mounted on a 140mm fan.
• Model #: 4251312603397

(39)

• Type: Liquid Cooling System
• Block Compatibility: Intel LGA 2066 / 2011 / 1700 / 1366 / 1156 / 1155 / 1151 / 1150 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Fan RPM: PWM 500~2000 R.P.M With L.N.C PWM 500~1500 R.P.M
• Color: Black
• Model #: CL-W306-CU12BL-A

Limited time offer, ends 10/07

• Model #: 73-CaseFans0920

Limited time offer, ends 09/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Type: Liquid Cooling System
• Model #: 50278

• Model #: 592395306558

Limited time offer, ends 09/30

• Model #: 11-001-330

• Model #: 9480402499946

• Type: Tubing
• Model #: WAT-0174

• Type: CPU Block
• Model #: CR-RD240RC-TK100

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
• Dimensions: 40 x 40x 11mm
• Model #: 11-001-191

• Type: CPU Block
• Model #: CR-RD1080RC-TK100

Limited time offer, ends 10/07

• Model #: C72J-Y-1074-2IN1

• Type: CPU Block
• Model #: CR-RD480RC-TK100

• Model #: 478643935209

Limited time offer, ends 10/07

• Model #: C72J-Y-1593-2IN1

• Type: Fittings
• Features: Dimension: ?22 x 26 (H) (mm) Applicable: ID : 3/8”( 9.5 mm ) Weight: 14 g Material: CU Screw Thread: G 1/4
• Model #: CL-W040-CU00SL-A

• Type: Pump
• Model #: WAT-0418

Limited time offer, ends 09/26

• Model #: VB01MVAPZYT

• Type: CPU Block
• Model #: CR-RD120RC-TK100

Limited time offer, ends 09/26

• Model #: VB01MV7W93O

• Type: CPU Block
• Model #: CR-RD360RC-TK100

• Model #: 9158154835021

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
• Model #: 11-001-394

Limited time offer, ends 09/26

• Type: Reservoir
• Model #: 1013522

• Type: Pump
• Model #: WAT-0414

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
• Dimensions: 20 x 14x 6mm
• Model #: 11-001-321

• Type: Tubing
• Model #: WAT-0248

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Model #: 654364308229

• Model #: 9359014194757