Thermaltake Pacific Tough C360 DDC Hard Tube Liquid Cooling KIT, (ToughFan/ W7 Non-RGB Water Block/ PR22-DDC Pump & Reservoir Combo) for Non-RGB Build, CL-W306-CU12BL-A

The Thermaltake Pacific Tough C360 DDC is a complete 360 mm hard-tube liquid-cooling kit for experienced PC builders creating a non-RGB custom CPU loop, with a W7 water block, DDC pump/reservoir, three fans, radiator, and PETG tubing.

Recommended For

• PC builders who already know—or want to learn—rigid-tube custom-loop assembly and want a complete starting setup with a 360mm radiator, pump/reservoir, fittings, coolant, and PETG tubing.
• Builders cooling a compatible, heat-intensive CPU during sustained gaming, rendering, or other demanding workloads who want a custom loop: a professional test found the kit performed well against the AIO coolers tested, though the measured temperature gains were modest.
• Non-RGB system builders who want a visible hard-tube loop and coolant display without lighting on the water block, and who prefer the kit’s understated black components.
• Custom-loop enthusiasts planning to add cooling components later, such as another radiator or a GPU water block, and prepared to plan and maintain the expanded loop.

Real-World Use Scenarios

• Building a first custom hard-tube CPU loop: the kit bundles the main cooling parts, fittings, PETG tubing, coolant, and filling accessories, but the builder still needs to cut and bend tubes, assemble the loop, and leak-test it. It is a hands-on project, not a ready-to-install AIO cooler.
• Creating a clean, non-RGB showcase build: the rigid tubing and black fittings give the CPU loop a visible custom-built look without lighting effects, matching the kit’s stated non-RGB positioning.
• Running CPU-heavy games or creator workloads: the 360 mm radiator and CPU water block are intended for cooling the processor under sustained load. A review of an earlier Pacific C360 DDC kit found CPU cooling performance with room to reduce fan speed, though results for this version will depend on the CPU, case airflow, and fan settings.
• Planning a hard-tube build in a compact or unusual case: check radiator and pump/reservoir clearance and map tube routes before assembly. The rigid tubes need to be cut and bent to fit, and the included tube lengths may not suit every case layout or complex routing plan.
• Balancing fan noise and cooling during everyday use: the radiator fans can be controlled through PWM, letting builders adjust fan speed to suit their preferred noise and cooling balance. The pump can also contribute audible noise, so a quiet result depends on the whole loop and how it is mounted and tuned.