DIY Cooling

Limited time offer, ends 02/28

• Model #: 11-001-061

• Model #: BP-BS90R2LD-2P

• Type: CPU Block
• Model #: PC-BASE232-UG

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Type: CPU Block
• Model #: N-GV4080EOC-X

• Type: CPU Block
• Model #: GBN-AS4090TUFOG

Limited time offer, ends 02/28

• Model #: 11-001-195

• Type: CPU Block
• Model #: GAISC

• Type: CPU Block
• Model #: PC-T8-CLR

• Model #: BPTA-F64-GS

Limited time offer, ends 02/28

• Model #: 11-001-014

• Model #: BPTA-F64-GB

• Model #: BP-SLTC6AL-SL-2P

• Type: CPU Block
• Model #: N-GV3090GMOC-X-NE

• Model #: BPTA-F95-GB

• Model #: BPTA-90RE-DW

• Model #: BPTA-DOTFH1622-DW

• Model #: BP-CBWP-C09-2P

• Model #: BP-RCPF-CC6U-2P

• Model #: BPTA-DOTFH1622-MB

• Type: CPU Block
• Model #: 6932167226419

• Type: CPU Block
• Model #: N-GV4080SGMOC-X

• Model #: BP-RBLCPF-CC3U-2P

• Type: CPU Block
• Model #: GBN-MS4070TIVES

• Type: CPU Block
• Model #: GBN-ST4080TQ

Limited time offer, ends 02/28

• Model #: 11-001-100

Limited time offer, ends 02/28

• Model #: 11-001-013

Limited time offer, ends 02/28

• Model #: 11-001-194

Limited time offer, ends 02/28

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.2mm
• Dimensions: 20mm x 20mm x 1.2mm
• Model #: 11-001-273

Limited time offer, ends 02/28

• Model #: 11-001-360

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

Limited time offer, ends 02/28

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
• Dimensions: 28 x 28 x 20mm
• Model #: 11-001-327

Limited time offer, ends 02/28

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272