Skip to main content
  • $17.95
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Darkside DUAL CONNECT Extension - 12" (30cm) Dual-Ended LED Strip - UV PRO (DS-1155)

    • Dual CONNECT(ed) lights were created from our customers feedback who suggested joining multiple DarkSide LED lights into one longer light.
    • 27 UV LEDs, 2.7W, 6V to 12V
    • Dual CONNECT(ed) lights were created from our customers feedback who suggested joining multiple DarkSide LED lights into one longer light.
    • Length: 12" (30cm)
    • Voltage: 6V-12V
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    The DarkSide DUAL CONNECT Extension is a 12" (30cm) UV G2-Pro rigid LED strip with a CONNECT connector on both ends: a female connector on one end connects to the power source, and a male connector on the other end powers the next DarkSide CONNECT LED. DarkSide created the DUAL CONNECT lights after customers asked to join several DarkSide LED lights into one longer light.

    Properties

    • Type: Rigid UV LED strip, dual-ended, CONNECT G2-Pro
    • Light color: UV
    • Length: 12" (30cm)
    • LED count: 27
    • Operating voltage: About 6V to 12V (dim to full brightness)
    • Power consumption: 2.7W
    • Connectors: CONNECT Type-A female (power in), CONNECT Type-B male (to the next LED)
    • Pieces in the pack: 1

    Join lights into one longer line

    Plug the female end into a DarkSide CONNECT power cable and attach another DarkSide CONNECT LED to the male end. You can connect several 12" strips together in a row, but DarkSide recommends not linking more than four LEDs directly to one motherboard header.

    G2-Pro UV

    The G2-Pro is the successor of the Rev 4.1 UV strip. Its wavelength is similar to Rev 4.1, so it matches older strips well, while the new generation LED module gives a noticeably higher light output and a wider beam: 120 degrees against the 90 degrees of Rev 4.1, so it covers a larger surface inside a case.

    Low aluminum board

    The G2-Pro is built on an aluminum PCB that carries heat away well and keeps the LED profile extremely low at 2mm, which suits stealth mounting and replacing the lights of water blocks.

    Modular power cable

    Modular power cables let you pick the power connection that suits you and change it later without replacing or modifying the LED. Choose a DarkSide CONNECT cable for your setup: to a 3-pin fan header, to a 4-pin Molex line of the power supply, Y-cables and 3-way cables, pass-through cables and extensions.

    Technical data

    • Model: DarkSide DUAL CONNECT Extension 12" UV PRO
    • LED color: UV, DarkSide custom wavelength (G2)
    • PCB: Aluminum, custom 30cm, Rev 3.1
    • LED profile: 2mm
    • LED count: 27
    • Beam angle: 120 degrees
    • Operating voltage: About 6V to 12V (min to max brightness)
    • Power consumption: 2.7W
    • Power wire: 7cm, modular (CONNECT)
    • Connectors: CONNECT Type-A (DS-0608) and Type-B
    • Sleeving: DarkSide Jet Black

    Notes

    • A DarkSide CONNECT cable is required to power the strip and is sold separately.
    • Many motherboards set their fan headers to 5V by default, which is not enough to light a UV strip. Set the header to 12V in the BIOS.
    • Do not link more than four LEDs directly to one motherboard header.
    • Do not bend the strip and do not short-circuit it: both can damage it permanently.

    In the box

    • 1x Darkside DUAL CONNECT Extension - 12" (30cm) Dual-Ended LED Strip - UV PRO

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by ModMyMods Return Policy

    Manufacturer Contact Info

    LOADING...