DIY Cooling

Limited time offer, ends 08/29

• Model #: C72J-Y-0903-2IN1

Limited time offer, ends 08/30

• Model #: C6WV-0806-OYJ-860

Limited time offer, ends 08/29

• Model #: C7FK-OYS-2026.7.29-314

• Model #: 1-Com-Cooler1585

• Model #: 1-Water-Cooling0397

Limited time offer, ends 08/31

• Model #: C00F-112410

• Model #: BestAdapter-18

Limited time offer, ends 08/29

• Model #: HT-ComCoolin000899

• Model #: 1-Com-Cooler2861

• Model #: 612521350498

Limited time offer, ends 08/31

• Model #: C00F-112411

• Model #: 1-CaseFans0133

• Model #: 27-Com-Cooler1585

(1)

• Multi-channel Kit: Dual Channel Kit
• Brand: V-Color
• Series: XSky RGB
• Heat Spreader: Yes
• Model #: TMXSL00WWK

Limited time offer, ends 08/31

• Model #: C0FE-112410

• Model #: ACFAN00351A

• Brand: Alphacool
• Model: 1022268
• Part Number: 1022268
• Color: Black
• Model #: 1022268

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: C0FE-112411

• Type: CPU Block
• Model #: CP-DWPB-X

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
• Dimensions: 40 x 40x 11mm
• Model #: 11-001-191

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

• Type: CPU Block
• Model #: B-UL-D5-X-V4

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 25g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-261

(1)

• Part Number: 90RC00V0-M0AAY0
• Type: Water Blocks
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700
• Block Dim.: 89 x 89 x 101mm
• Model #: ROG RYUJIN III WB

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
• Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
• Model #: 11-001-331

Limited time offer, ends 08/31

• Model #: C0FE-112405

Limited time offer, ends 08/31

• Model #: WLC78S.0803.Pallet0700

• Model #: DF-12025-ARGB-251

Limited time offer, ends 08/31

• Model #: WLC78S.0803.Pallet0696

• Type: CPU Block
• Model #: B-MB115X-BE

Limited time offer, ends 08/31

• Model #: C00F-112407

Limited time offer, ends 08/31

• Model #: C0FE-112414

Limited time offer, ends 08/31

• Model #: C0FE-112401

Limited time offer, ends 08/31

• Model #: C0FE-112407

Limited time offer, ends 08/31

• Model #: TB08JKZ337G