DIY Cooling

• Model #: 5060681981116

Limited time offer, ends 06/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
• Dimensions: 15mm x 15mm x 0.3mm
• Model #: 11-001-266

• Type: CPU Block
• Model #: CP-PARX-X-CT50-100-BK

• Model #: MYH-0244

• Model #: 649823636302

• Type: CPU Block
• Model #: CP-DWPB-X

• Model #: BP-CBWP-C09-2P

• Model #: BP-RBLCPF-CC3U-2P

Limited time offer, ends 06/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Type: Indicator
• Color: Black
• Model #: 53067

Limited time offer, ends 06/30

• Model #: 11-001-061

• Type: Coolant
• Model #: MX1UVG1LTR

• Model #: 5060681981086

Limited time offer, ends 06/30

• Model #: 11-001-289

• Type: Fittings
• Model #: TCWD-V1

• Type: Fittings
• Model #: TSSXK-A01

• Type: Coolant
• Model #: MX1C1LTR

• Model #:

• Type: Reservoir
• Model #: YPH65-220 V2

• Model #: 5060681981093

• Model #: TA-90DIA-GS-2

• Model #: 5060681982977

• Model #: 5060681982748

• Model #: BP-MBACET-2P

• Type: Fittings
• Model #: 53066

• Type: CPU Block
• Color: Clear
• Model #: RT14MA-430

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

• Model #: TG-MP8-100-100-10-2R

• Model #: 5060681980805

Limited time offer, ends 06/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Color: Yellow
• Model #: PFLEXA10-758-PUY

• Type: Fittings
• Model #: BP-MVVFRGIG14-TBBK

• Model #: 27-Com-Cooler1868

Limited time offer, ends 06/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Model #: BP-BHT14SL-90R