DIY Cooling

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14mm x 14mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Dim...
• Model #: 11-001-052

(7)

• Type: CPU Water Block
• Block Compatibility: Intel: LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 / 775 AMD: AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Dim.: 93.4 (L) x 93.4 (W) x 22 (H) mm
• Block Material: Copper + PMMA
• Model #: CL-W279-CU00SW-A

(25)

• Type: Distro-Plate with Pump Combo
• Pump Dim.: 360 (L) x 120 (W) x 84.8 (H) mm
• Reservoir Capacity: 200 ml
• Specification: Dimension: 360mm(L) x 120mm (W) x 84.8mm (H) Material: PMMA Capacity: 200ml Maximum Flow Rate: 1135 L/h Maximum Pressure: 50 pSI Input Voltage: 12V / 5V Power Input: 37W / 3.5W Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W263-PL00SW-A

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

Limited time offer, ends 08/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Di...
• Model #: 11-001-049

• Type: Fittings
• Model #: FA90E20-RR

• Type: Fittings
• Model #: FA30-RR

• Type: CPU Block
• Color: Razor Red
• Model #: PC-V32K-RR

• Model #: FG-B120-RR

• Model #: 264505770985