DIY Cooling

Limited time offer, ends 02/28

• Model #: 11-001-193

• Model #: 652843004488

Limited time offer, ends 02/28

• Model #: 11-001-061

• Model #: 27-Com-Cooler0490

• Type: CPU Block
• Model #: PC-ICE2-UP

• Model #: HT-ComCoolin000196

Limited time offer, ends 02/28

• Model #: 11-001-015

• Type: CPU Block
• Model #: CPU-RAY-ON-M-NE

• Type: CPU Block
• Model #: 18016

• Model #: 404669103070

Limited time offer, ends 02/28

• Model #: 11-001-127

Limited time offer, ends 02/28

• Model #: 11-001-014

Limited time offer, ends 02/28

• Model #: 11-001-100

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 20mm x 20mm x 6mm Weight: 25g Package Content: 5pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-259

Limited time offer, ends 02/28

• Model #: 11-001-013

• Type: CPU Block
• Model #: B-FRB240

Limited time offer, ends 02/28

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25mm x 25mm x 5mm Weight: 20g Package Content: 5pcs x Heatsink
• Dimensions: 25mm x 25mm x 5mm
• Model #: 11-001-260

• Model #: ACFRE00114A

Limited time offer, ends 02/28

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink Material : Aluminium Color : Silver Tone Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H) Weight : 100g Package Content : 50 x Heatsink
• Dimensions: 14 x 14x 6mm
• Model #: 11-001-192(50)

Limited time offer, ends 02/28

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-258

• Model #: 80-Water-Cooling0144

• Type: CPU Block
• Model #: B-FRB360

Limited time offer, ends 02/28

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: 1-Com-Cooler1572

• Model #: HT-ComCoolin000817

• Model #: 1-Water-Cooling0057

• Model #: 1-Com-Cooler0565

• Model #: 1-Com-Cooler1440

• Model #: 1-Water-Cooling0147

• Model #: 1-Com-Cooler1373

• Model #: 1-Com-Cooler2103

• Model #: 1-Water-Cooling0144

• Model #: 1-Com-Cooler2639

• Model #: 1-Com-Cooler1032

• Model #: 1-Water-Cooling0545