DIY Cooling

Limited time offer, ends 03/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 25 x 15x 10mm
• Model #: 11-001-065

Limited time offer, ends 03/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset Quantity: a lot of 20 Pieces M3 Screw Hole. Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H) Thickness" 0.8mm Color : Anodized Black Weight: 2g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 19x 15x 10mm
• Model #: 11-001-067

Limited time offer, ends 03/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

Limited time offer, ends 03/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Type: Radiators
• Model #: 38335

Limited time offer, ends 03/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.6mm
• Dimensions: 15mm x 15mm x 0.5mm
• Model #: 11-001-268

Limited time offer, ends 03/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.5mm
• Dimensions: 15mm x 15mm x 1.5mm
• Model #: 11-001-269

• Model #: TG-DM-FIT-0009

• Type: Fittings
• Model #: BP-TBWP-C04

Limited time offer, ends 03/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Di...
• Model #: 11-001-049

Limited time offer, ends 03/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14mm x 14mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Dim...
• Model #: 11-001-052

• Model #: BP-RBLWP-C06-2P

Limited time offer, ends 03/31

• Model #: 11-001-362-6CM

• Type: Fittings
• Model #: BP-BSWP-C46

Limited time offer, ends 03/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
• Dimensions: 40 x 40x 11mm
• Model #: 11-001-191

• Model #: BP-TBC4-BK

Limited time offer, ends 03/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060

• Type: Fittings
• Model #: BP-TBWP-C17

• Model #: BP-TBEML14

• Type: Fittings
• Model #: BP-WTP-C08

• Model #: BP-CBDWP-DC06

• Type: Fittings
• Model #: BP-TBWP-C72

• Model #: BP-DWWP-C02

• Model #: BP-DWWP-C01

• Model #: BP-TBDWP-DC06

• Type: Fittings
• Model #: BP-MBWP-C61

• Type: Fittings
• Model #: BP-TBWP-C08

• Type: Fittings
• Model #: BP-TBWP-C95

• Model #: BP-BSWP-C06V2

• Type: Fittings
• Model #: BP-DWWP-C06V2

• Type: Fittings
• Model #: BP-WTP-C17

• Model #: BP-CBEML16

• Model #: BP-TBPRE-06

• Type: Fittings
• Model #: BP-DBRWP-C06

• Type: Fittings
• Color: White
• Tube Dim.: Dimension: 26 (D) x 21 (H) (mm) Applicable: OD : 16 mm Screw Thread: G 1/4 Note: PETG Tube to G1/4
• Tube Material: CU + AL
• Model #: CL-W211-CU00WT-A

• Model #: BP-HTSB12CL-1M-1