DIY Cooling

• Model #: BPM-AT45R-SL

• Model #: BPM-ATEMLA14-GD

• Type: Fittings
• Model #: BP-BSDG14AALPM

• Type: Tubing
• Model #: BP-HTSB12CL-1M

• Type: Tubing
• Block Compatibility: False
• Pump Bearing: 0
• Pump Capacity: S13 Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - Klar 1m (3,3ft) Retailbox
• Model #: 18528

• Type: Tubing
• Block Compatibility: False
• Pump Bearing: 3.53
• Pump Capacity: S16 Alphacool HardTube 16/11mm Borosilikatglas 60cm
• Model #: 18496

• Type: Fittings
• Block Compatibility: False
• Pump Bearing: 1.53
• Pump Capacity: ANS Alphacool Eiszapfen 16/10mm Anschraubtülle G1/4 - Chrome
• Model #: 17233

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink
• Dimensions: 14 x 14 x 10mm
• Model #: 11-001-322

Limited time offer, ends 06/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 06/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
• Dimensions: 20mm x 20mm x 0.8mm
• Model #: 11-001-271

Limited time offer, ends 06/30

• Model #: 11-001-100

Limited time offer, ends 06/30

• Model #: 11-001-195

• Type: Fittings
• Block Compatibility: False
• Pump Bearing: 1.92
• Pump Capacity: SEN Alphacool Eiszapfen Temperatursensor G1/4 IG/IG & mit AG Adapter - Chrome
• Model #: 17362

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: VGA Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
• Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
• Model #: 11-001-128

• Type: Fittings
• Color: Black
• Model #: 17393

• Model #: BPTA-PAM-GB

• Model #: BPTA-PFANMFH

Limited time offer, ends 06/30

• Model #: 11-001-235

• Model #: BP-ETAIR-1

Limited time offer, ends 06/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

• Type: Fittings
• Model #: BP-DWETAIR

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Model #: BP-TBRG

• Model #: BP-MBETAIR-1

• Type: Fittings
• Model #: BP-TBWP-CT

• Model #: BP-TBWP-C60-4P

• Model #: BP-CBWP-C04

• Model #: BP-DWTR-C

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink Material : Aluminium Color : Silver Tone Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H) Weight : 100g Package Content : 50 x Heatsink
• Dimensions: 14 x 14x 6mm
• Model #: 11-001-192(50)

• Model #: BP-CBEML16

• Model #: BP-TBWP-C39-2P

• Model #: BP-TBWP-C09-4P

• Model #: BP-TBWP-C40-4P

• Model #: BPM-ATETAIR-MB

• Model #: BPM-AT90R-MB

• Model #: BPM-AT90R-GD