DIY Cooling

• Type: Reservoir
• Model #: BP-PRM126-GD

• Model #: BPM-VG5090AST-V2

Limited time offer, ends 07/31

• Model #: 11-001-127

Limited time offer, ends 07/31

• Model #: 11-001-100

• Type: Fittings
• Model #: BP-MVV-TBBK

• Type: Fittings
• Model #: BP-DBREML14-6P

• Model #: BP-BSE90DML16-RBL

• Model #: BPM-ATEMLA16-MB

• Model #: BPM-ATEMLA16-GD

• Model #: BPM-ATEMLA16-WH

• Model #: BP-DWE90RMLA14

Limited time offer, ends 07/31

• Model #: 11-001-129

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink
• Dimensions: 14 x 14 x 10mm
• Model #: 11-001-322

Limited time offer, ends 07/31

• Model #: 11-001-330

• Model #: BP-BHT16BS-90R

• Model #: 1026563

Limited time offer, ends 07/31

• Model #: 11-001-015

• Model #: BP-DWE90RMLA16

• Model #: BP-BSE90DML14-2P

• Model #: BPM-ATETAIR-SL

• Model #: BPM-ATEMLA14-SL

• Model #: BP-CBE90DML16-TB

• Model #: BP-TBE90DML14-2P

• Model #: BPM-ATEMLA14-WH

• Model #: BP-DWE90DML14-2P

• Type: Fittings
• Model #: BP-MVVFRGIG14-TBBK

• Model #: BP-CBE90DML14-TB

• Model #: BP-RBL90DIG14-2P

• Type: Fittings
• Model #: BP-RBLEML14-6P

• Model #: BP-QFM-C02

Limited time offer, ends 07/06

• Model #: M.2-SSD Heatsink

Limited time offer, ends 07/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 07/31

• Model #: 11-001-325

• Model #: BP-MVVFRIGIG14-DWBK

• Type: Fittings
• Model #: BP-RBLEML16-6P

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
• Dimensions: 20mm x 20mm x 0.8mm
• Model #: 11-001-271