Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
Specifications: Includes Accessories:
MicroScanner2 Cable Verifier
main wiremap adapter
remote identifiers #2-7
IntelliTone Pro 200 probe
shielded twisted-pair RJ45 patch cord
RJ11 patch cord
clip-set RJ45 to 8 alligator clip bare wire adapter
F Coax push on patch cord
accessory soft pouch
(2) AA alkaline batteries
(1) 9V alkaline battery
MicroScanner2 Getting Started Guide
MicroScanner2 Owners CD
IntelliTone Pro Getting Started Guide
MicroScanner2 owners CD
IntelliTone Pro Getting Started Guide
IntelliTone Pro owners CD
packaged in a deluxe Fluke Networks carry case
Specifications: Reversible Ratchet Handle
10Pcs Bit Group:
SL5-SL6 ; PH1-PH2 ; PZ1-PZ2
T10-T15-T20 ; Adapter
5Pcs Socket 3/16"-1/4"-5/16"-11/32"-3/8"
Anti-Static/ Anti Shock Wrist Band
6Pcs Precision Screwdriver
4 1/2" Side Cutter
5" Long Nose Pliers
Flashlight
RJ45 Modular Crimping Tool
8P8C Modular Plug
Protection Cap
Magic Cable Tie
Cable Tester
See through Blow Mold Case
Specifications: Test Pin Configuration:
- RJ45 EIA, TIA-568A/568B, and crossover cables
- RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
- USOC 2, 4, 6, and 8
- Coax Video-BNC and CATV-F
- USB 3.0, USB 2.0
Transmitter Unit Interface:
- 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
- 1 x USB 3.0/2.0 Type-B port
- Test button
- Mode button
- On/off button
- LED indicators
- Battery compartment
- Receiver unit attachment port
Power Source
- Transmitter: 9 V DC battery (not included)
- Remote unit: No power needed