CORN LGA 1700 CPU Cooler, Push-Pin Tool-Free Install for Intel 12th 13th Gen Desktop Processor, Copper Core Heatsink with 100mm 4-Pin PWM Fan 1000-3000 RPM For Desktop PC Computer

A direct fit for Intel LGA 1700 systems. This top down CPU cooler is built for 12th and 13th Gen Intel desktop processors, with a solid copper base set into a radial aluminum fin stack that pulls heat off the processor and spreads it out through the fins.

Mounting takes about a minute. The four spring loaded push pins come pre fitted on the mounting frame, so you line them up with the holes in the board and press each one down until it clicks. No backplate, no screws, no tools, and no bracket to buy separately.

The 100 mm fan uses a hydraulic bearing and plugs into a standard 4 pin PWM header, so the motherboard sets the speed for you across the 1000 to 3000 RPM range. It idles quietly and spins up as the load builds.

At 47 mm tall it clears most standard ATX and micro ATX cases, and the round 100 x 100 mm footprint leaves room for tall memory and for the first graphics card slot.

Rated for processors up to 100 W TDP, it is a practical replacement for a failed or missing stock cooler, a budget or office build, or a spare to keep on the shelf.

Thermal compound is pre applied to the copper base under a protective cover, so there is nothing to spread before you mount it. The finish is matte black, and the smoked fan blades suit a black build.

Please check that your motherboard uses the LGA 1700 socket before ordering. This cooler is designed and supplied for the LGA 1700 socket used by Intel 12th and 13th Gen desktop processors.