Thermal Compound / Grease

• Specifications: Material Specification: Al >10(wt%) ZnO >50(wt%) Adhesiveness: 210000Cps Thermal Conductivity: 8 W/m - °C Thermal Impedance: 0.019 °C-in²/W Specific Gravity: 2.6g/cm³
• Model #: PRO-PKZERO-1.5G

(638)

• Volume / Net Weight: 3.5g
• Thermal Conductivity: 3.8 W/mK
• Specifications: CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply. TM30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds. Net Weight: 3g Thermal Conductivity: 3.8 W/mK Thermal Impedance: 0.01°C -in2/W Viscosity: 2300K cPs Specific Gravity: 2.5g/cm3
• Model #: CT-9010001-WW

(19)

• Part Number: CT-9010010-WW
• Volume / Net Weight: 3.0g
• Model #: CT-9010010-WW

• Volume / Net Weight: 3.5g
• Long Term Operating Temperature: -50 to 130 C
• Specifications: Average Particle Size: < 0.49 micron < 0.000020 inch Extended Temperature Limits: Peak: -50 Celsius Degree to >180 Celsius Degree Long-Term: -50 Celsius Degree to 130 Celsius Degree Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
• Model #: AS5-3.5G

• Specifications: Material Specification: Al 70~88(wt%) ZnO 18~34(wt%) Oil 8~12(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 330000Cps Thermal Conductivity: 11.2 W/m - Degree C Thermal Impedance (Resistance): 0.013 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread card. Specific Gravity: 2.7g/cm3
• Model #: PRO-PK3-1.5G

• Specifications: Material Specification: Al 70~88(wt%) ZnO 18~34(wt%) Oil 8~12(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 330000Cps Thermal Conductivity: 11.2 W/m - Degree C Thermal Impedance (Resistance): 0.013 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread spoon Specific Gravity: 2.7g/cm3
• Model #: PRO-PK3-30G

• Model #: TC-P16005

• Model #: TH-301304

• Model #: TG-P-P-030

• Model #: DRG-U6 PRO-10g

• Specifications: Material Specification: Al 60~85(wt%) ZnO 15~25(wt%) Oil 12~20(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 310000Cps Thermal Conductivity:10.2 W/m - degrees Thermal Impedance: 0.017 degrees -in2/W Included: One syringe of thermal compound and one easy-to-spread card. Specific Gravity: 3.2g/cubic centimeter
• Model #: PRO-PK1-1.5G

• Specifications: Material Specification: Al 70~88(wt%) ZnO 15~27(wt%) Oil 11~19(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 250000Cps Thermal Conductivity: 10.2 W/m - Degree C Thermal Impedance (Resistance): 0.015 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread spoon Specific Gravity: 2.5g/cm3
• Model #: PRO-PK2-30G

• Model #: TP-VP01-C

• Specifications: Material Specification: Al 70~88(wt%) ZnO 15~27(wt%) Oil 11~19(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 250000Cps Thermal Conductivity: 10.2 W/m - Degree C Thermal Impedance (Resistance): 0.015 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread spoon Specific Gravity: 2.5g/cm3
• Model #: PRO-PK2-1.5G

• Model #: UPSIREN U6 PRO 50g

• Model #: TH-301302

• Model #: BB-Grease

• Thermal Conductivity: 8.5 W/mK
• Model #: XBP-40802-2PACK

• Model #: UX_50g

• Specifications: Material Specification: Al >10(wt%) ZnO >50(wt%) Adhesiveness: 210000Cps Thermal Conductivity: 8 W/m - °C Thermal Impedance: 0.019 °C-in²/W Specific Gravity: 2.6g/cm³
• Model #: PRO-PKZERO-5G

(38)

• Specifications: Form: 1 Part Color: White Viscosity/Flowability: Nonflowing Specific Gravity (cured): 2.37 Shelf Life: 24 months from DOM Dielectric Constant: 4.4 at 100k Hz Dissipation Factor 0.02 at 100k Hz Dielectric Strength: 550 volts/mil; 21.7 kV/mm
• Model #: HTK-002-U1

• Volume / Net Weight: 20g
• Long Term Operating Temperature: -50 to 200 C
• Model #: DRG-UX-20g

Limited time offer, ends 04/25

• Model #: CERAMIQUE2-25G

• Model #: PH-GC-01-A

• Model #: TH-501704

• Volume / Net Weight: 12g
• Long Term Operating Temperature: -50 to 130 C
• Specifications: Average Particle Size: <0.49 micron <0.000020 inch Extended Temperature Limits: Peak: -50 Degrees C to >180 Degrees C Long-Term: -50 Degrees C to 130 Degrees C Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
• Model #: AS5-12G

• Model #: TH-501710

• Model #: TH-301310

• Model #: AS5-3.5G X5

Limited time offer, ends 04/25

• Model #: AS5-3.5G-2PKC

• Specifications: Material Specification: Al 70~88(wt%) ZnO 18~34(wt%) Oil 8~12(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 330000Cps Thermal Conductivity: 11.2 W/m - Degree C Thermal Impedance (Resistance): 0.013 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread spoon Specific Gravity: 2.7g/cm3
• Model #: PRO-PK3-5G

• Volume / Net Weight: 1.5g
• Thermal Conductivity: 1.93 W/mK
• Specifications: Bleed < 0.05% at 150 Degree C/24 Hours Evaporation < 0.001% at 150 Degree C/24 Hours Specific Gravity > 1.7 at Degree C Thermal Conductivity > 1.93 W/m-K at 25 Degree C Thermal Resistance < 0.120 Degree C-in2/W at 25 Degree C Operating Temperature: -30 to 180 Degree C (-22 to 356 Degree F) Color: Silver Materials: Silicone Compounds 50%, Carbon Compounds 30%, Metal Oxide Compounds 20% Product Length: 2.6 in [67 mm] Product Weight: 0.4 oz [10 g] Product Width: 0.8 in [20 mm] Included in Package: 1 x 1.5g Tube of Silver Based Thermal Grease
• Model #: SILVGREASE1

• Specifications: Thermal Conductivity: 5.7 W/m-C Thermal Impedance: 0.026 C-in²/W Includes Alcohol Pad and Spreader 4 Gram Package
• Features: Non-Electrical Conductive, Non-Corrosive
• Parts: NA
• Labor: NA
• Model #: CR-CP15

• Volume / Net Weight: 25g
• Long Term Operating Temperature: -150 to 130 C
• Specifications: Average Particle Size: <0.36 microns <0.000015 inch (70 particles lined up in a row equal 1/1000th of an inch.) Temperature limits: Peak: -150 Degrees C to >185 Degrees C Long-Term: -150 Degrees C to 130 Degrees C Coverage Area: 25-gram syringes. (Approximately 9.2cc) At a layer 0.003" thick, one tube will cover about 200 square inches. Important Reminder: Due to the unique shapes and sizes of the particles in Ceramique 2, it will take a minimum of 25 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode...
• Model #: CMQ2-25G

• Model #: 1021765

• Specifications: Weight: 30 Gram Material Specification: Al: 60~85(wt%) ZnO: 15~25(wt%) Oil: 12~20(wt%) antioxidant: 0.5~2(wt%)
• Model #: PRO-PK1-30G