Cable

• Model #: ZXH-H7366

• Model #: ZXH-H10853

• Model #: MLN-13925

• Model #: cocoo-0016027

• Model #: YQC-T1303

• Model #: slcml-812

• Model #: n-tmd-2371

• Model #: ooc-0139003

• Model #: ywc-2357538

• Model #: ooc-0138807

• Model #: ywc-2357166

• Model #: RETBVC-564

• Model #: MLN-14099

• Model #: n-tmd-3708

• Model #: ywc-2357539

• Model #: ywc-2357540

• Model #: ZZL-RNU-ASD1091016

• Model #: ZXH-H10564

• Model #: ZXH-H10823

• Model #: meiyoug-312

• Model #: n-tmd-3496

• Model #: AGCC-2352780

• Model #: AGCC-2352783

• Model #: meiyoug-381

• Model #: acf-908

• Model #: YQC-T1477

• Model #: cocoo-0016514

• Model #: CCOOC-0042005

• Model #: EC-1169

• Model #: 147923828318

• Specifications: Test for: Tests 20-pin and 24-pin power supplies Tests SATA power Tests Pentium 4 power connector Tests PCI-Express power connectors Tests Xeon power connectors Tests Floppy drive connectors Tests standard 4-pin power supply connectors Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs Note: The -5V DC output is took off from Intel ATX12V design guide since the 1.2 version. 1. The -5V usage was for last generation ISA slot. But the old ISA had been phased out since 1993~1994. 2. Neither P3 nor P4 systems will need -5V output.
• Model #: PST-2

Limited time offer, ends 01/26

• Specifications: ATX PSU each output connectors check Tests 20-pin and 24-pin power supplies Tests SATA power Tests Pentium 4 power connector Tests PCI-Express power connectors Tests Xeon power connectors Tests Floppy drive connectors Tests standard 4-pin power supply connectors Accurate voltage indicator +/-V(+12V1/+5V/+3.3V/5VSB/+12V2/ -12V) ATX P.G value display. Lower or higher P.G values alarm Lower voltage detected alarm. Over voltage alarm. No voltage detected alarm. Dimension : 2.52" x 5.91" x 0.71"
• Model #: PST-3

• Model #: YQC-T1123

• Model #: MLN-12322

• Model #: MLN-14958

• Model #: ccooc-0043028