Features: 1.ESD Safe For Electronics : This is high quality ESD soldering mat designed for a safer and better work surface to sensitive electronics assemble and repair or soldering. The resistivity value of the mat is 10^6 - 10^8 ohms which is best protecting sensitive electronic. It's an essential anti-static work
Package Contents: Anti-Static Mat ESD Safe for Electronic Includes ESD Wristband and Grounding Wire and 20pcs Anti-static Labels
Specifications: Test Services:
Fault Display
High Speed Testing
Generation of two tones for tracing cables and locating hidden cables
Length Measurement:
15.75" to 656 ft Twisted Pair
Ports: 1 x RJ-45
Status Indicators:
5 green LEDs for pairs and shield display
6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY)
Batteries: Alkaline AAA
Features
Features
Auto-sleep mode
Generation of two tones for tracing cables and lication hidden cables
Packaging
Package Contents
MicroMapper MT-8200-49A Network Testing Device
MicroMapper Remote
Patch Cable
6-Volt Alkaline Battery
User Guide
The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults...
Specifications: Loop Limit: 2.4 kOmaximum at 48 VDC (nominal 15 mA minimum loopcurrent)
DC Resistance (Talk Mode): 150 Otypical at 80 mA current
AC Impedance (Monitor Mode):
Low impedance (Ring position) 600 Oat 1 KHz typical
High impedance (HI Z position) 100 kOminimum at 1 KHz
Rotary Dial Output: 10 pps .5 pps
Pulsing Rate: 60 % ± 2 %
Percent Break: 800 ms typical
Interdigit Interval Leakage During Break: > 50 kO
DTMF Output: ±1 % maximum
Tone Frequency Error Level per Tone Pair: dBm maximum, - dBm minimum
High versus Low Tone Difference: 4 dB maximum
Temperature:
Operating: -5 degree C to degree C
Storage: -40 degree C to degree C
Drop: 1 meter, 4 times
Altitude: To 3,000 meters (10,000 feet) maximum
Relative Humidity: 10 %to 80 % (non-condensing)
Specifications: Test Pin Configuration:
- RJ45 EIA, TIA-568A/568B, and crossover cables
- RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
- USOC 2, 4, 6, and 8
- Coax Video-BNC and CATV-F
- USB 3.0, USB 2.0
Transmitter Unit Interface:
- 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
- 1 x USB 3.0/2.0 Type-B port
- Test button
- Mode button
- On/off button
- LED indicators
- Battery compartment
- Receiver unit attachment port
Power Source
- Transmitter: 9 V DC battery (not included)
- Remote unit: No power needed