Specifications: Test Services:
Detects IntelliTone digital signal and 1 kHz signal from analog toners.
Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling.
Ports: 1 x RJ-45 10/100Base-TX Network
Connectivity Media:
Twisted Pair
Coaxial
10/100Base-TX
Status Indicators:
8 LED indicators
1 Synch LED indicator
Batteries: Alkaline Battery
Battery Life: 20 Hour Typical
Input Voltage: 9 V DC Battery
Temperature:
32°F (0°C) to 104°F (40°C) Operating
-4°F (-20°C) to 140°F (60°C) Storage
Dimensions: 8.73" x 1.88" x 1.26"
Package Contents:
IntelliTone 200 Probe
RJ-11 and RJ-45 patch cables
Lanyard
Owners CD
Quick start guide
9 volt battery
Additional Information: POTS telecom service available
Altitude: 3000 m
Operating Relative Humidity:
95 % (50 °F to 95 °F ; 10 °C to 35 °C)
75 % (95...
Specifications: Test for:
Tests 20-pin and 24-pin power supplies
Tests SATA power
Tests Pentium 4 power connector
Tests PCI-Express power connectors
Tests Xeon power connectors
Tests Floppy drive connectors
Tests standard 4-pin power supply connectors
Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs
Note:
The -5V DC output is took off from Intel ATX12V design guide since the 1.2 version.
1. The -5V usage was for last generation ISA slot. But the old ISA had been phased out since 1993~1994.
2. Neither P3 nor P4 systems will need -5V output.