lilila-ree Mini 12 Pin GPU Power Cable for NVIDIA GeForce RTX 30 Series Dual PCIe 8 Pin Male to Mini 12 Pin Female Power Adapter Cable for EVGA/Seasonic Modular PSUs (12-inch, 16AWG)

Upgrade Your RTX 30 Series Build with a Clean, Direct Power Solution

Designed specifically for NVIDIA GeForce RTX 30 Series Founders Edition graphics cards, this Mini 12 Pin power cable replaces the bulky adapter included with your GPU. Connect directly from your modular power supply to your graphics card for a cleaner, more reliable setup.

Important Not for RTX 40/50 Series

This cable features the original Mini 12 Pin connector (12 power pins, no sense pins) used on RTX 30 Series GPUs. While it physically fits 12VHPWR ports found on RTX 40 and 50 Series cards, it lacks the 4 sense pins required for proper power negotiation. For RTX 40/50 Series, please use a 12VHPWR (12+4 pin) cable.

12-Inch Short Length Ideal for Compact Builds

At just 30cm (12 inches) total length, this cable eliminates excess slack while providing just enough reach for clean cable management in ITX, M-ATX, and small form factor cases. No more coiling or hiding extra cable length.

16AWG High-Gauge Wire 600W Ready

Built with premium 16 AWG tinned copper wire thicker and more capable than standard 18AWG. Delivers up to 600W of stable, clean power to your GPU. Factory-tested for reliable performance under high-load conditions.

Dual PCIe 8-Pin Input to Mini 12-Pin Output

Converts two standard PCIe 8-pin ports from your modular power supply into a single Mini 12-pin connector for RTX 30 Series graphics cards. Eliminates the need for the factory-supplied 8-pin to 12-pin adapter.

The #1 cause of connector failure is incomplete insertion. When connecting to your GPU:

1. Push straight and firmly Insert the 12-pin connector into the GPU port with even pressure.
2. Listen for the click Ensure the retention clip fully engages and you hear a distinct click.
3. Verify no gap After installation, check that there is no visible gap between the connector housing and the GPU socket.

Improper insertion can cause high resistance, overheating, and permanent damage to your graphics card.

For the 12-inch short cable: Do not bend the cable sharply within 35mm of the connector. Maintain a straight approach to the GPU port to ensure proper contact.

Critical: EVGA and Seasonic use different pinouts on the PSU side. Please select the version that matches your power supply.

EVGA Version Type1/Type2 Pinout

Compatible Series:

1. G2, G3, G5, G6
2. P2, T2
3. GQ
4. B2, B3, BQ
5. GS (550W, 650W only)
6. NEX-G, NEX-B

NOT Compatible With:

1. EVGA 1000PS, 850GS, 1050GS (these use Type3/Type4 pinout)
2. EVGA G1 series
3. Any non-EVGA power supplies

Seasonic Version Unified Pinout (2016 and later)

Compatible Series (650W and above):

1. PRIME (TX, PX, GX, Snow Silent)
2. FOCUS (GX, PX, FOCUS Plus Gold/Platinum)
3. X-Series (KM3, XM2)
4. XP2 (SS-660XP2, SS-760XP2, SS-860XP2)
5. XP3 (SS-1050XP3, SS-1200XP3)
6. M12II Evo (520W850W)
7. G-Series semi-modular (SSR-450RM, SSR-550RM, SSR-650RM)
8. SSR-1000PD, SSR-1200PD, SSR-600TL

NOT Compatible With:

1. Any power supply under 650W
2. Seasonic FOCUS Gold / FOCUS GM (only one PCIe port)
3. Any non-Seasonic power supplies

If your PSU model is not listed, please message us before ordering.