Your Browsing History
- Free 30-day Returns
$72.00
Meet Your Seller
(2pack) Direct in Line Plug-in Ethernet Surge Protector
- Ethernet Surge Protection
- Standards compliance: IEC 61000-4-5
- Data Rate: 100/1000Mbps
- Pairs Protected: 1-2,3-6,4-5,7-8
- Total Discharge Current (Imax @8/20s): 0.3kA x 8 (line to GND)
- Voltage protection level (Up @Line-GND): 45V @ 0.3kV (8/20)
- Data Rate: 100/1000Mbps
- Bandwidth (2db) per pair: >250MHz
- Insertion Loss: <0.2dB @100MHz
- Pairs Protected: 1-2,3-6,4-5,7-8
- Protective Element: GDT, TVS
- Mini & Direct in Line Plug-in
- Smart Surge Protector
- New Energy System
- AC Power Supply System
- DC Power System
- Ethernet & PoE System
- Data Signal & RS485 System
- 4~20mA Control System
- Power Distribution Unit (PDU)
+
+
Overview
Specs
Reviews
WTH-SG/RJ45 Series surge protective devices are applied to surge protection for data communication systems.
WTH-SG/RJ45-S is connected in series in CAT6 network cables, compatible with 10/100/1000M Base-T Ethernet systems, protecting the equipment which are connected to the network (e. g. computers, routers, PoE devices, etc. ) against damages by over-voltage surge.
What are the advantages of the GDT+TVS type surge protection? It provides a two-step surge protection mode: the first-stage GDT protection, releasing strong surge intrusion and reduce the strength of the surge; it is followed up the second-stage TVS fine protection, achieving a lower residual voltage value.
What are the advantages of 1-2, 3-6, 4-5, 7-8 line full protection mode of GDT+TVS type surge protection? If you don't know whether the system is 100M or 1000M, the full line surge protection mode of GDT+TVS avoids the confusion of your selection.
How do I determine the quantity of surge protector that I need for protecting the equipment? Surge on the STP cable will be transmitted in two directions to the ends of the cable. The surge protector A protects the equipment on the A side, such as an ethernet switch, etc. And Surge protector B protects the equipment on the B side. such as an ethernet equipment. If only the device on one end of cable needs to be protected, then only one surge protector is needed.
Is WTH-SG/RJ45-S compatible with PoE system? WTH-SG/RJ45-S is compatible with PoE system, the breakdown voltage of WTH-SG/RJ45-S on line-GND is higher than 100V; The specifications tested under
PoE 57V standard: 300mA each pair line, total Max Watt on 4 pair lines is 65W.
WTH-SG/RJ45-S is connected in series in CAT6 network cables, compatible with 10/100/1000M Base-T Ethernet systems, protecting the equipment which are connected to the network (e. g. computers, routers, PoE devices, etc. ) against damages by over-voltage surge.
What are the advantages of the GDT+TVS type surge protection? It provides a two-step surge protection mode: the first-stage GDT protection, releasing strong surge intrusion and reduce the strength of the surge; it is followed up the second-stage TVS fine protection, achieving a lower residual voltage value.
What are the advantages of 1-2, 3-6, 4-5, 7-8 line full protection mode of GDT+TVS type surge protection? If you don't know whether the system is 100M or 1000M, the full line surge protection mode of GDT+TVS avoids the confusion of your selection.
How do I determine the quantity of surge protector that I need for protecting the equipment? Surge on the STP cable will be transmitted in two directions to the ends of the cable. The surge protector A protects the equipment on the A side, such as an ethernet switch, etc. And Surge protector B protects the equipment on the B side. such as an ethernet equipment. If only the device on one end of cable needs to be protected, then only one surge protector is needed.
Is WTH-SG/RJ45-S compatible with PoE system? WTH-SG/RJ45-S is compatible with PoE system, the breakdown voltage of WTH-SG/RJ45-S on line-GND is higher than 100V; The specifications tested under
PoE 57V standard: 300mA each pair line, total Max Watt on 4 pair lines is 65W.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by B-IN Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...