Your Browsing History
- Free 30-day Returns
- $5.00 Shipping ()
$321.99
Most customers receive within 5-9 days.
Meet Your Seller
RS 232 to USB Reader. Drip Feeder.
- 3D program simulation
- transmit DNC drip program (works in TAPE mode)
- The version has a wifi connection function
- Copy programs from PC to DNC 2 via wifi network,or via USB memory card
- with 2-4GB internal memory, USB reader support with large capacity
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading & Down-Loading. RUN the program, COPY or SEND a notification to DNC 2 from the computer via WIFI network. Create or edit programs directly on DNC devices cut program by% or G CODE LINE Nxxxx. There are 3 rear mounted magnets of the device that make it easy to put DNC on CNC machines.
PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER.
NOTE: You can power the DNC DEVICE via CABLE RS232, PIN 25 = 24V. If on the 25 pin of RS232 on the CNC machine with power (24VDC) you can not use 12vdc adapter
PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER.
NOTE: You can power the DNC DEVICE via CABLE RS232, PIN 25 = 24V. If on the 25 pin of RS232 on the CNC machine with power (24VDC) you can not use 12vdc adapter
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Detail Driven Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...