Specification: Hardware
Audio: Yes
Cabling: Cat 5e UTP or better
Daisy-Chain: No
Output Signal: HDMI
Ports: 1
Rack-Mountable: Yes
Performance
Audio Specifications: 7.1 Surround Sound
Max Distance: 70 m / 230 ft
Maximum Cable Length: 0.2 ft [0.1 m]
Maximum Digital Resolutions: 4096 x 2160 (4K) @ 30 Hz
Wide Screen Supported: Yes
Connector(s)
Connector A:
- 1 x HDMI (19 pin) Female Input
- 1 x
Feature: Extend HDMI video over CAT5 or CAT6 cabling up to 230 feet away, with a small USB-powered transmitter for discreet installation
Works with HDMI video sources such as Blu-ray players & computers and HDMI televisions monitors and projectors
HDBaseT Extender / HDMI over single CAT 5 or CAT 6 Ethernet Extender /
Power Supply: 12 V power supply included with international socket adapters for all countries
Specification: Contact Closure: 25 pin D-type connector providing 8 up to isolated inputs and 8 relay contact closure outputs
Inputs: Optical isolators triggered by connection to ground (maximum 5 V @ 14 mA)
Outputs: Mechanical relay contact closure to ground (maximum 30 V @ 1 A)
Ethernet: 10 / 100 BaseT with loop through for connecting to other Ethernet enabled equipment
Computer Interface: 1 x USB 2.0 high speed interface for configuration and firmware updates
Software Included: Configured via ATEM Switcher utility
Firmware Upgrade: Firmware built into software driver. Loaded at system startup or via updater software
Operating System: Microsoft Windows 7 and Apple Mac OS X
Feature: Displays Tallies for Video Signals
Indicates On-air ...
Input Connector: ONE INPUT TO TWO OUTPUTS - This mini HDMI splitter can distribute one HDMI input signal to two HDMI displays, transmit video and audio simultaneously, no loss, no lag (NOTE: This product does not extend monitors, only to duplicate)(the unit does comes with a USB-micro USB cable,But does not come with a 110v power source)
Video: Video outputs
DisplayPort, Single link DVI-I
VGA (via included convertor, highest resolutions only with reduced blanking)
In "Dual screen" mode, connection can occur either through DVI and DisplayPort, or through VGA and DisplayPort.
Audio: Analog audio from ClickShare CSC Base Unit software
v01.02.00.09 onwards
Digital audio (embedded in DP signal) from ClickShare CSC Base Unit software v01.05.00.32 onwards