Specification: Signal Inputs/Output
Input DDC Signal: 5 volts p-p (TTL)
Maximum Single Link Range: 4K x 2K
Output Video: HDMI 1.4 with full 3D and 4Kx2K@30Hz + HDCP
CEC - Pass through enabled
Operating Frequency
Vertical Frequency Range: 50/60Hz
Video Amplifier Bandwidth: 2.97 Gbps
Environment
Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Resolution Support: Interlaced (50&60Hz): 480i, 576i, and 1080i
Progressive (50&60Hz): 480p, 576p, 720p, 1080p, and 4Kx2K
Distance: up to 200 ft. at 1024 x 768 (60Hz)
up to 150 ft. at 1920 x 1080 (60Hz)
Color: Black
LED Indicator: The Green RJ45 LED on the local unit illuminates to indicate it is connected to and receiving power from the source. The Orange RJ45 LED on the local unit does not illuminate. The Green RJ45 LED on the remote unit illuminates to indicate it is receiving power from the external power supply. The Orange RJ45 LED on the remote unit illuminates to indicate it is connected to the local unit and receiving a signal from the source.
System Requirements: Computer with DVI video and 3.5mm stereo audio connectors
Monitor with a DVI video connector
Monitor with a 3.5mm stereo audio connector; or, a set of speakers with a 3.5mm stereo audio connector
Feature: For use where DVI video and 3.5mm stereo audio signals need to be transmitted from a computer to multiple sets of monitors/speakers
Distance: 4K@60Hz Up to 230ft/70M via Cat6/7 cable
Resolution Support: Up to 3840x2160 @60Hz
Audio: PCM 7.1 / DTS-HD / Dolby Digital 5.1ch via HDMI and 3.5mm stereo audio from receiver
HDMI: Transmitting unit (TX):
1x 19-pin HDMI, Type A, Female, Input
1x 19-pin HDMI, Type A, Female, Loop out
Receiving unit (RX):
1x 19-pin HDMI, Type A, Female, Output
Power Supply: 12 V power supply included with international socket adapters for all countries
Specification: Contact Closure: 25 pin D-type connector providing 8 up to isolated inputs and 8 relay contact closure outputs
Inputs: Optical isolators triggered by connection to ground (maximum 5 V @ 14 mA)
Outputs: Mechanical relay contact closure to ground (maximum 30 V @ 1 A)
Ethernet: 10 / 100 BaseT with loop through for connecting to other Ethernet enabled equipment
Computer Interface: 1 x USB 2.0 high speed interface for configuration and firmware updates
Software Included: Configured via ATEM Switcher utility
Firmware Upgrade: Firmware built into software driver. Loaded at system startup or via updater software
Operating System: Microsoft Windows 7 and Apple Mac OS X
Feature: Displays Tallies for Video Signals
Indicates On-air ...
Specification: Signal Type: Single-Link DVI-D
CE Approval: Yes
RoHS: Yes
Connectors Inputs: 1 x DVI-D, 1 x 3.5-mm stereo audio jack
Outputs: 2 x DVI-D, 2 x 3.5-mm stereo audio jacks
Indicators: 1 x Power/Video OK dual-color LED, 2 x Video Output LEDs
Resolution Support: 1080p (1920 x 1080), UXGA (1600 x 1200)/WUXGA (1920 x 1200)
Video Input: SDI Video Input
4 x 10 bit SD/HD switchable camera inputs
1 x 10 bit SD/HD switchable program input from switcher, including Tally information embedded in
the SDI signal
Optical Fiber Video Input
4 x single mode SD/HD switchable camera inputs with LC connector
Audio Output: Analog Audio Output
4 x 3-Pin XLR Balanced Audio Pairs (1 x pair per fiber input)
2 x RCA jacks provide a L/R stereo pair
System Requirements: OS Compatibility
Mac:
OS X 10.7 Lion and later
OS X 10.8 Mountain Lion and later
Windows:
Windows 7
Windows 8
Power Supply: 110 - 220V AC, 50/60 Hz
12 - 31 V DC redundant input
Note: IEC powercord is required/not included, redundant power supply not included
Resolution Support: Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a); 1080p@60m (Cat 5e/6) / 70m (Cat 6a)
*4K supported:
4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Power Supply: VE802R
Connectors: 1 x DC Jack (Black) with locking
Consumption: DC 5V, 4W
VE802T
Connectors: 1 x DC Jack (Black) with locking
Consumption: DC 5V, 3.6W
Feature: The VE802 HDMI HDBaseT-Lite Extender extends an HDBaseT signal up to 70m from the HDBaseT source using one Cat 5e/6/6a cable. VE802 supports RS-232 and IR signaling passthrough, allowing you to control the HDMI source device from the remote unit (VE802R) while also granting access to the HDMI display device from the local unit (VE802T). IR signals can also be extended in both directions. The VE802 features Power over HDBaseT (POH) which can send power over Cat 5e/6/6a cable without an add...
Resolution Support: Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a);
1080p@100m
*4K supported:
4096 x 2160 / 3840 x 2160 @ 60 Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30 Hz (4:4:4)
Video: Max. Data Rate: 10.2 Gbps (3.4 Gbps Per Lane)
Max. Pixel Clock: Up to 340 MHz
Compliance:
HDMI (3D, Deep Color, 4K)
HDCP Compatible
Consumer Electronics Control (CEC)
Resolution Support: Up to 1920 x 1200@35 m (Cat 5e/6) / 40 m (Cat 6a); 1080p@60 m (Cat 5e/6) / 70 m (Cat 6a)
Power Supply: VE601R
Connectors: 1 x DC Jack with locking
Consumption: 5 VDC, 4.23 W
VE601T
Connectors: 1 x DC Jack with locking
Consumption: 5 VDC, 1.85 W
Feature: The VE601 DVI HDBaseT-Lite Extender is able to extend a DVI 1080p display up to 70 m using an Ethernet cable. This combination of ATEN and HDBaseT technology even supports sharing 1920 x 1200 media up to 40 m away, offering a simple, adaptable, and cost-effective solution for any professional A/V installation.
The VE601 DVI HDBaseT-Lite Extender is the perfect solution for professional A/V installations that require video signal interference protection, such as in medical and military installations. With its lightweight and easy-to-mount design, not to me...
Specification: Signal Inputs/Output
Input DDC Signal: 5 volts p-p (TTL)
Maximum Single Link Range: 4K x 2K@30Hz
Output Video: HDMI 1.4 with full HD 1080p, 1920x1200, 720p, 3D and 4Kx2K + HDCP
CEC - Pass through enabled
Operating Frequency
Vertical Frequency Range: 50/60Hz
Environment
Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Video Bit Rate/Bandwidth: Video Amplifier Bandwidth: 2.97 Gbps
Resolution Support: Interlaced (50&60Hz): 480i, 576i, and 1080i
Progressive (50&60Hz): 480p, 576p, 720p, 1080p, and 4Kx2K@30Hz
Power Supply: Connects to a computer by a single USB cable. No additional power is required.
Specification: 12 x programmable knobs.
2 x buttons for SHIFT / ALT etc.
1 x display to soft label all programmable controls.
Feature: Apart from the size, the first thing you will notice about Element is the stylish, ultra slim design.
Quality comes in the form of a solid aluminium, precision laser cut case.
All the internal components have been carefully chosen for reliability.
All rotary controls and trackerballs have optical pickups, which means they are long-life and high precision.
The buttons are ultra-reliable with a positive tactile response.
The displays are crisp, high-contrast, high-resolution, easy to read, white OLEDs. When put side by side the panels magnetically lock tog...
Specification: Maximum Pixel Clock: 2x 165 MHz
Video Input Connector: (1) DVI-I 29-pin, female
Video Output Connector: (1) DVI-I 29-pin, female
Operating temperature range: +5 to +45 deg. Celsius
Power Supply: 5V DC (needed for programming only)
Power Consumption: 5 Watts (max)
Feature: Quick and easy way to store EDID information from any DVI display
Provides a virtual EDID to maintain active monitor status when switching away from a source
Supports resolutions up to 1920x1200, 2K, and 3840x2400 (Dual Link)
EDID write protection switch
No power is required after initial programming