Pro A/V Extender & Repeater

• Extender & Repeater Type: Video Extender
• Specification: Ports In: 1 x HDMI Female Ports Out: Video Output: 1 x HDMI Female Audio Output: 1 x TOSLINK (Optical) / 1 x RCA (Coaxial) / 2 x RCA (Stereo) 1 x DC Jack Console Connectors (Flash ROM Upgrade): 1 x 4-conductor 3.5 mm Jack 1 x (Green) Power On LED Switches Mode Selection: Audio Channel - 1 x Slide Switch / HDMI Audio On/Off - 1 x Slide Switch F/W Upgrade: 1 x semi-recessed pushbutton Power: 5.3 VDc/150 mA Power Consumption: 0.8 W - 3 BTU / hr Dimension: 7.9" x 3.2" x 1" Weight: 1 lbs.
• Feature: Repeats HDMI input signal up to 15 meters Extracts HDMI audio signal and outputs as additional audio source Supports optical / coaxial digital audio and analog stereo audio HDMI and HDCP compatible Super Video Quality - up to 1920x1080 (1080p) Firmware upgradable CH2/CH5...
• Model #: VC880

• Model #: BE4KIP200D

• Model #: BE4KIP200E

• Model #: EM-HD-NCP

Limited time offer, ends 12/20

• Extender & Repeater Type: Transmitter/Receiver
• 3D Support: Yes
• Resolution Support: 4K
• HDMI: 1 Input/1 Output
• Model #: eARC100

• Distance: 492ft
• Color: Black
• HDMI: HDMI ARC
• Other Connector: SPDIF Optical
• Model #: JTECH-AET-AS

• Model #: IdG45-B01MQ3FBCO

Limited time offer, ends 01/14

• Type: HDMI, USB
• Video Resolution: 1920x1080
• LED Indicators: Yes
• Dimensions: 5.43 x 5.35 x 1.46 inches
• Model #: E-OZD5D6-4

• Option: HDMI Receiver
• Model #: JTECH-EX-120M-L4K-RX

• Model #: JTD18G-H5CH

• Housing: Metal
• Distance: 70m
• Resolution Support: Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a); 1080p@60m (Cat 5e/6) / 70m (Cat 6a) *4K supported: 4096 x 2160 / 3840 x 2160 @ 60 Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30 Hz (4:4:4)
• Video: Max. Data Rate: 10.2 Gbps (3.4 Gbps per lane) Max. Pixel Clock: 340 MHz Compliance: HDMI (3D, Deep Color, 4K), HDCP Compatible, Consumer Electronics Control (CEC)
• Model #: VE801T

• Extender & Repeater Type: Video Capture & Editing
• Specification: Maximum Pixel Clock: 2x 165 MHz Video Input Connector: (1) DVI-I 29-pin, female Video Output Connector: (1) DVI-I 29-pin, female Operating temperature range: +5 to +45 deg. Celsius Power Supply: 5V DC (needed for programming only) Power Consumption: 5 Watts (max)
• Feature: Quick and easy way to store EDID information from any DVI display Provides a virtual EDID to maintain active monitor status when switching away from a source Supports resolutions up to 1920x1200, 2K, and 3840x2400 (Dual Link) EDID write protection switch No power is required after initial programming
• Dimensions: 2.6" W x 1.8" D x 1.2" H
• Model #: EXT-DVI-EDIDN

OUT OF STOCK

• Resolution Support: Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a); 1080p@60m (Cat 5e/6) / 70m (Cat 6a) *4K supported: 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
• Power Supply: VE802R Connectors: 1 x DC Jack (Black) with locking Consumption: DC 5V, 4W VE802T Connectors: 1 x DC Jack (Black) with locking Consumption: DC 5V, 3.6W
• Feature: The VE802 HDMI HDBaseT-Lite Extender extends an HDBaseT signal up to 70m from the HDBaseT source using one Cat 5e/6/6a cable. VE802 supports RS-232 and IR signaling passthrough, allowing you to control the HDMI source device from the remote unit (VE802R) while also granting access to the HDMI display device from the local unit (VE802T). IR signals can also be extended in both directions. The VE802 features Power over HDBaseT (POH) which can send power over Cat 5e/6/6a cable without an add...
• Model #: VE802