Motherboard Accessories

• Model #: CLAWB0FCGYBFJR

• Model #: CLAWB0FLT9RFTJ

• Model #: LE-T37

• Model #: Le-S37

• Model #: CLAWB0FJD711JH

• Model #: CLAWB0FJD7JDTN

• Model #: CLAWB0FJMCYB6H

• Model #: CLAWB0FJMPFMZR

• Model #: CLAWB0FJM9Z6P2

• Model #: CLAWB0FJD722VH

• Model #: CLAWB0FJD99L7K

• Model #: CLAWB0FJM7R8W1

• Model #: CLAWB0FJDKT8DV

• Model #: MFJIAN-2519

• Model #: 592395318704

• Model #: CLAWB0F8QXF5WX

• Model #: 477915974694

• Model #: 592395284887

Limited time offer, ends 01/06

• Model #: YWC-SCV-CAS128707

Limited time offer, ends 01/07

• Model #: C32P.112504

• Form Factor: Raspberry Pi
• Model #: Raspberry Pi-A2

• Features: Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1 & Evolv Shift 2 Air) Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case) Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wi...
• Model #: PCIE4EXT11SL-028-WH

• Model #: 477915970740

• Model #: 472744034809

Limited time offer, ends 01/29

• Model #: 673847994865

• Model #: 926686650813

• Model #: GA-B550-AORUS MASTER

• Model #: H81 BTC PRO

• Model #: B85M NIGHT ELF

• Model #: 970 Performance-F