Specifications: Upgradable to carry additional display: Yes
Material: Steel
Color Options: Black
Desk fixing options: Top mounting desk attachment
Flat screen: maximum supported weight, lb: 44.00
VESA mounting hole pattern: 75x75, 100x100
Minimum desk thickness: 0.59
Maximum desk thickness allowed (inches): Any
Spring assisted height adjustability: No
Rotation around pole: Optional 355, 270, 180, 90 or 0° at the base
Tilt adjustment: 20° in any direction
Pan adjustment: 20° in any direction
Landscape to portrait screen rotation: Yes
Height adjustable: Yes
Maximum arm reach (inches): 3.13
Specifications: Color: Silver with black donuts
Max Weight per mount: 26.5 lbs.
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360 degrees
Tilt/pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Pole height: 30"
Cable management: Internal / Integrated
Mounting options: Freestanding
Pole diameter: 1.6
Foot print: 16.6" x 12"
Specifications: It’s easy to get the best viewing position when you can effortlessly pull out the screen from the wall, position it in almost any direction, even turn it around corners and then smoothly return it to the wall when finished. Level the screen at any time, even after installation, for that picture perfect end result. Never worry about cables and cords getting in the way; cable management delivers a clean clutter-free look to any installation.
Load Capacity: 25 lb Maximum
Color: Black
Package Contents: PA730 Universal Articulating Wall Arm; Cable management slots and cable ties
Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: Monitor Supported: Up to 24" Flat Panel Display
Weight Supported (Approximate): Up to 26.50 lb
Color: Silver, Black
Material: Aluminum, Steel, Plastic
Height: 30.0"
Width: 12.0"
Depth: 12.0"
Form Factor: Desk Mountable
Package Contents:
Freestanding Dual Vertical Mount
Base
Upright Pole
2 x Quickshift Donuts
2 x VESA Plate
Tightening Tool
4 x Cable Ball
2 x Security Screw
(M8 x 50mm) Screw
1 x 2mm Allen Key
1 x 5mm Allen Key
8 x (M4 x 10mm) Mounting Screws
8 x (M4 x 13mm) Mounting Screws
8 x (M4 x 16mm) Mounting Screws
Additional Information:
- Supports two displays vertically up to 26.5 lbs (12kgs) each
- Ball joint allows infinite display adjustment for any viewing angle up to 20 degrees in any direction simple tension adjustment
- Quick release mechanism for fast display attachment or removal portrait to landscape rotation...
Specifications: Max Weight per mount (lbs): 55
Quick release Mounting Head: Yes
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360°
Tilt/pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Display pan adjustment: 90 degrees left and right, total of 180 degrees
Mounting options: Wall
Fixed Distance from wall to rear of display: 3.1"
Number of studs required: 1
Color: Black