Monitor Accessories

• Type: Monitor Arms
• Model #: B03-HP-ACC-ME02680

• Model #: ADIB073BMDWSK

• Type: Monitor Arms
• Specifications: 22" IPS FHD (1920 x 1080), 75 Hz Refresh Rate, 1 VGA, 1 HDMI 1.4
• Features: On-screen controls, AMD FreeSync, Anti-glare, Low Blue Light Mode, Neat Cable Management, Narrow Bezel Display
• Dimensions (H x W x D): 4.76x15.20x22.30 in
• Model #: 2x22inch-monitor

• Type: Mount
• Specifications: Color: Two-tone grey LCD Size Capacity: Up to 30" LCD Weight Capacity: 16~30 lbs (7.3~13.6 kg) Movable Size: Lift: 20" (51 cm) / Tilt: 30° Rotation: 90° P/L CPU Holder Capacity: 40 lbs (18 kg). VESA FDMI, MIS-D, 75/100 (hole patterns = 100 x 100 mm and 75 x 75 mm); VESA FDMI, MIS-E (hole pattern = 200 x 100 mm); VESA FDMI, MIS-F (hole pattern = 200 x 200 mm). Optional VESA Bracket Adaptor Kit (97-474) can be ordered separately for display interface that uses a VESA FDMI, MIS-F 400 x 200 mm hole pattern Package Incluses: Cart, LCD pivot, integrated worksurface/keyboard tray with left/right mouse tray, scanner holder bracket, mouse holder, rear handle, cable storage box, CPU holder, four dual casters (two locking)
• Weight: 88
• Parts: 3 years limited
• Model #: 24-189-055

• Type: Tools and Hardware
• Color: Silver
• Dimensions (H x W x D): 9.84” x 7.56” x 17.5
• Weight: 3.09
• Model #: AMR1WL

• Type: Mounting Extension
• Specifications: Speed-Connect Fixed Extension Columns can be used with any 1 1/2" NPT accessory to lower projector to desired height. Consists of 1 1/2" NPT column threaded on both ends (3" to 6' lengths). Includes an integrated port on one end for routing cables
• Parts: 1 year limited
• Labor: 1 year limited
• Model #: CMS024

• Brand: Amer
• Part Number: HYDRA1B-W
• Parts: 3 Years
• Model #: HYDRA1B-W

• Type: Cart
• Color: Black / Gray
• Specifications: Recommended Use: LCD display / keyboard / mouse / CPU Recommended Display Size: 30" Flat Panel Mount Interface: 100 x 100 mm, 75 x 75 mm, 200 x 200 mm, 400 x 200 mm Max Load Weight 28 lbs Color: Gray, black Adjustable height, rotating, tilt, locking casters, cable box
• Dimensions (H x W x D): 28.20" x 32.20" x 36.50"
• Model #: 24-216-085

• Type: Mount
• Specifications: Glide Wall Mount will be hidden behind display in most cases when used with screen size of 46" or greater; when used with screens smaller than 46", the mount may be visible Mounting holes must fit within spacing range below: Horizontal = 200 mm (min.) to 400 mm (max.) Vertical = 100 mm (min.) to 400 mm (max.) Includes low-profile lift module, mounting template, tilt brackets, installation and mounting hardware, cable management hardware
• Weight: 29.7
• Model #: 61-061-085

• Model #: DWT2670XE

• Type: Stand
• Model #: DFT992HA3101N

• Type: Monitor Arms
• Model #: B04-HP-ACC-ME02680

• Type: Others
• Model #: 98-034

• Type: WorkFit C-Mod, Single Display Sit-Stand Workstation
• Specifications: LCD Size: = 22" Capacity: 5–18 lbs/2.3–8.1 kg Lift: 25"/63 cm Tilt: 25° Rotation: 360° P/L VESA: MIS-D Includes cart, LCD pivot, integrated worksurface, keyboard tray with left/right mouse tray, wrist rest, mouse holder, cable storage box, CPU holder, four dual casters (two locking) Lift Range: LCD/keyboard/worksurface adjusts 20" (51 cm) in tandem; LCD adjusts 5" (13 cm) independently; maximum LCD height adjustment = 25" (63 cm) Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm) Constant Force (CF) lift-and-pivot motion technology CPUs attach safely to rear of cart with CPU Holder. Accommodates CPUs from 12"H x 3"D to 18"H x 8.5"D (30 x 8 cm to 46 x 22 cm) CPU Holder capacity = 40 lbs (18 kg) Ergonomic negative-t...
• Model #: 24-198-055

• Type: Monitor Arms
• Model #: B02-HP-ACC-ME02680

• Type: Others
• Model #: 45-478-026

• Type: Sit-Stand Desk Converter
• Color: Black
• Specifications: Cable Management: Yes Display Rotation: 360 degree Height Adjustment: Yes Maximum Display Size: 30in Swivel / Pivot: 360 degree around the support post Tilt: +90 degree / -15 degree Weight Capacity (Per Display): 11 kg [24.3 lbs.] Weight Capacity of Keyboard Tray: 2.3 kg [5.1 lbs.] Enclosure Type: Steel, MDF Wood and Plastic
• Dimensions (H x W x D): 26.40" x 35.00" x 6.30"
• Model #: BNDSTSLGPVT

• Type: Stand
• Color: Silver
• Specifications: # of Displays Supported: 4 Articulating: Yes Cable Management: Yes Mounting Options: Desktop Stand VESA Hole Pattern(s): 75x75 mm / 100x100 mm Display Rotation: 360° Display Swivel: 360° Display Tilt: +90° / -40° Height Adjustment: Yes Maximum Arm Extension: 16.60" Maximum Display Size: 32" Weight Capacity (Per Display): 17.70 lbs. Included in Package 4 - Swivel Arms 4 - VESA Mounts 2 - Shoulders 1 - Upper Pole 1 - Lower Pole 1 - Pole Connector 1 - Base 2 - Cable-Management Clips 16 - M4x16 Screws 16 - M4x12 Screws 16 - M5x16 Screws 16 - M5x12 Screws 16 - M4x20 Screws 16 - M5x20 Screws 32 - Spacers 16 - Washers 1 - 3mm Hex Key 1 - 6mm Hex Key 1 - User Manual
• Dimensions (H x W x D): 4.90" x 13.70" x 21.80"
• Model #: ARMQUADSS

• Type: VGA splitter , VGA Monitor Y Splitter Cable
• Color: Black
• Specifications: VGA Splitter 1 in 2 Out Monitor Y Cable One Male to Two Female VGA SVGA Port with 1M Cable Support 1080P 60Hz for Laptop PC to Monitor Projector Two Display Screen - NOT Support Extended Mode
• Weight: 100g
• Model #: NTRA40254C

• Type: Monitor Filters / Protectors
• Features: Sold as 1 Each.
• Weight: 1.2
• Model #: IVRBLF30W

• Model #: 922387457621

• Type: Single-Monitor Stand
• Specifications: Includes mouse pad, wrist rest, mouse pouch + Larger display sizes may inhibit the keyboard tray folding flat in storage position Weight Capacity: Listed weight capacity represents total load, including both the monitor and contents of keyboard tray. Maximum monitor weight = 25 lbs (11.3 kg); monitor thickness greater than 3" (7.6 cm) may decrease capacity Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm) Fold-down keyboard tray Negative-tilt keyboard tray is adjustable 0° to -10° Integrated cable management system can be configured on either side Easy-to-clean exterior
• Weight: 36.4
• Parts: 3 years limited
• Model #: 60-593-216

• Type: Mount
• Specifications: Includes 10" and 34" Wall Tracks with (2) black track covers, LX Sit-Stand Wall Mount LCD Arm, LX Sit-Stand Keyboard Arm, wrist rest, mouse holder, Medium CPU Holder, two (2) 10" Cable Channels, mounting kits for hollow-wall and wall-stud installation Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment Weight Capacity: display = 7-25 lbs (3.2-11.3 kg); keyboard = 5 lbs (2.2 kg); CPU = 40 lbs (18 kg). Monitor depth may affect weight capacity. Read more Monitor tilts 70 degrees up and 5 degrees down Rotation Stop on wall-mount base limits turn of extension-base connection to 180 degrees, preventing extension from contacting wall Locking connections between arm, extension and base offer increased theft deterrence and prevent potential disconnections caused by j...
• Model #: 45-358-026

• Type: Mount
• Specifications: Compatibility: <=24" LCD Weight Capacity: 5-30 lbs(2.3-13.6 kg) Lift: 9"(22.9 cm) Tilt: 10° VESA: MIS-D Additional Information: Negative-tilt keyboard tray is adjustable 0° to -10° Maximum Monitor Weight = 25 lbs (11.3 kg) Monitor thickness greater than 3" (7.6 cm) may decrease capacity Integrated Cable Management System can be Configured on Either Side Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm) Package Contents: StyleView 60-593-195 Vertical Mount Lift Mouse Pad Wrist Rest Mouse Pouch
• Weight: 36
• Parts: 5 years limited
• Model #: 60-593-195

• Type: All-In-One Lift Stand
• Specifications: Includes stand, CPU strap, buckle cover, VESA monitor mounting kit, cable ties * Weight Capacity: 6 - 16 lbs. for display; total stand capacity = 37 lbs for combined weight of display, CPU, keyboard and mouse Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm) Meets tip test requirements of UL Specification 1678 Compatible with most 15" - 24" displays, and most small or ultra small form factor CPUs, notebook computers, and gaming consoles Maximum CPU size = 14" H x 4" D (36 x 10 cm); minimum CPU size = 7" H x 1.8" D (18 x 4.6 cm). The CPU should be centered on the stand Motion may be restricted when using 22" - 24" monitors in portrait mode Removal of lock screw allows portrait to landscape rotation Mounting Option: Two M4 threaded screw inserts are located at the bottom of ...
• Model #: 33-326-085

• Model #: 683491615672

• Type: Mounting Kit
• Model #: 2DW52AT

• Model #: CBL-SAST-0590

• Model #: 9100513082805

• Model #: 9430159840874

Limited time offer, ends 08/15

• Model #: 9046581021202

Limited time offer, ends 08/15

• Model #: 374884467670

• Model #: 20222

• Model #: 9158154935998

• Model #: C6PC28-RD-12

OUT OF STOCK

• Type: Sit-Stand Desk Converter
• Color: Black
• Specifications: Cable Management: Yes Display Rotation: 360 degree Height Adjustment: Yes Display Rotation: +/- 90 degree Maximum Arm Extension: 596mm [23.5 in] Maximum Display Size: 26in Maximum Height: 560 mm [22 in] Minimum Height: 160 mm [6.3 in] Pan: 360 degree Swivel / Pivot: 180 degree around the support post 360 degree at the elbow Tilt: +90 degree / -65 degree Weight Capacity of Keyboard Tray: 2.3 kg [5.1 lbs.]
• Dimensions (H x W x D): 26.40" x 35.00" x 6.30"
• Model #: BNDSTSLGSLIM