Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Fit for 3.5" IDE HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector
Package Contents: 1 x bridge board
1 x Molex power cable
Specifications: Main chip: NEC UPD720202 chipset
Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times;
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps
SATA to take power by the board, or you can into a small Molex 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cabl...
Specifications: Industry Standards:
- USB 3.0 Specification Rev. 1.0
- USB Battery Charging Specification Rev. 1.2 (Apple Mode only)
- PCI Express Base Specification Rev. 2.0
- Intel xHCI Specification Rev. 1.0
Interface: USB 3.0
Connector Type(s): 1 - PCI Express x4 Male
External Ports: 4 - USB 3.0 A (9 pin; SuperSpeed) Female
Internal Ports:
- 1 - LP4 (4 pin; Molex Large Drive Power) Female
- 1 - SATA Power (15 pin) Plug
Maximum Cable Length: 9.8 ft [3 m]
Maximum Data Transfer Rate: 5Gbps per 2 ports - 10Gbps Total
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes