Product DescriptionWith the popularity of USB 3.0, more and more computer cases offer a 19-pin USB 3.0 port on the front of the case, but the old motherboards do not support USB 3.0 or do not have a 19PIN interface! At this point, you can convert the PCI-E signal to the 19-pin USB 3.0 port and 2 rear USB 3.0 ports via the motherboard's PCI-E slot, and then convert the 19PIN of the panel to the Insert expansion card so that it offers the front super high-speed USB 3.0 interface is very practical!
Specifications
: Compatible with the PCI Express specification version 2.0 Compatible with the USB 3.0 SuperSpeed specification version 1.0 Note the xHCI specification version 1.0
Master chip: Renesas UPD720201 chipset Applies to all PCI-E -Sockets The highest transfer rate is up to 5 Gbit / s, which is much higher than 480 Mbit / s from USB 2.0, which is up to 10 times. Backward compatible with USB 2.0, USB1. 1, USB 1.0
Transfer rate: 5000/480/12 / 1.5 Mbit / s
USB output: up to 5V 2A (increased current type) Integrated SATA-extended power interface Supports di e USB hot plug function Support Windows XP / 2003 / Vista / win7 / win8 / win10Hardware requirements: This product is a desktop PCI-E expansion card which requires a free PCI-E slot on the motherboard for installation and use. Also determine if the slot is blocked by the graphics card. The PCI slot cannot be installed and used. Never install the expansion card in the PCI slot.
Packaging accessories:
A: USB 3.0 expansion card * 1B: Driver
CD * 1C: Low-profile
bracket * 1D: 4 pin Molex to SATA power cable * 1