

Step 1
Tighten bottle to base until arrow on the bottle aligns with Cokunst logo. If it's not aligned, it will not be started.
Click button to check power.

Step 2
Cut fruit into 0.6*0.6in small pieces.
Pour fruit pieces and milk into the bottle in a ratio of 20%: 60%, the ingredients can not exceed the MAX LINE.

Step 3
Tighten the top lid.
Tilt blender and double-click button to start blending. Shake blender while blending to prevent ingredients from jamming blades.

Step 4
The blender auto stops blending after 30s.
You can open the top lid to drink directly or install the portable lid to carry it with you on the go.
PSB-6 Portable blender
Merchant VideoLighting Instructions

Troubleshootings, contact seller support for further solution!
Bottle is aligned with the base
Tighten bottle to base until arrow on the bottle aligns with Cokunst logo. If it's not aligned, it will not be started.
Double-click button to start
Double-click to start the blender and the blender will stop automatically after 30 seconds. During the mixing process, you can press the button again to pause the mixing.
Magnetic Induction Technology
Blades can only rotate properly after the bottle and base are tightened.
One click --- Check battery power
- Click the button once to check the battery power.
- If the lights turn red, it means the battery is low, please charge it in time.
- NOTE: The device cannot be used while charging.
Idling 5s protection
It will automatically stop after idling for 5s

Step 1
Tighten bottle to base until arrow on the bottle aligns with Cokunst logo. If it's not aligned, it will not be started.
Click button to check power.

Step 2
Cut fruit into 0.6*0.6in small pieces.
Pour fruit pieces and milk into the bottle in a ratio of 20%: 60%, the ingredients can not exceed the MAX LINE.

Step 3
Tighten the top lid.
Tilt blender and double-click button to start blending. Shake blender while blending to prevent ingredients from jamming blades.

Step 4
The blender auto stops blending after 30s.
You can open the top lid to drink directly or install the portable lid to carry it with you on the go.
PSB-6 Portable blender
Merchant VideoLighting Instructions
| Flash Red & Blue | After spinning the bottle into the base until tightened. |
|---|---|
| Flash Red & Blue | When spinning the bottle out of the base. |
| Flash Upwards in Blue | When blending. |
| Flash in Red | Low battery while blending, have to charge it. |
| All Lights in Red or Off | Out of power while double click the button. |
| Light Flash Slowly | Charging status. |
| All Lights Light up in Blue | Full charged. |
| Flash Qick in Red for 8s | Blades gets stuck. |
| One Blue Light On | 25% power battery remianed. |
| Two Blue Light On | 50% power battery remianed. |
| Three Blue Light On | 75% power battery remianed. |
| Four Blue Light On | 100% power battery remianed. |

Troubleshootings, contact seller support for further solution!
| Not Working | Blades get stuck. --- Double-click the button to restart and shake it from side to side as it blends. |
|---|---|
| Not Working | Ingredients added are above the MAX LINE. --- Remove some ingredients to below the MAX LINE, and then use it normally. |
| Not Working | Bottle and base weren't tightened. --- Unscrew and re-tighten, align the arrow on the bottle with the "cokunst" logo on the base. |
| Not Working | Low Power --- Click the button once to check the power status. The lights are red or the lights don't light up, which means the power is low, please charge it. |
| Not Working | No charge for over a month. --- Batteries are damaged. |
| Not Working | Worked many times in a row. --- Wait 20 minutes and then use it normally. |
| Not Working | Operation is incorrect. --- One-click to check the power, quick double-click to start on. |
| Not Working | Base and bottle are separated --- The blender has safety protection function, so the blender will not work if the base and bottle are separated. |
| Leakage | Ingredients added are above the MAX LINE. --- Remove some ingredients to below the MAX LINE, and then use it normally. |
| Leakage | The bottle and base weren't tightened. --- Unscrew and re-tighten, align the arrow on the bottle with the "cokunst" logo on the base. |






















































