Specifications: Hardware
Indoor and Outdoor Use
Networking Interface: (1) 10/100 MbE RJ45 port
Connectivity
BLE 4.1
NFC
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption: 5W
Supported Voltage Range: 48V DC
ESD/EMP Protection: Air: ±15kV, contact: ±8kV
Proximity sensor
Speaker
LEDs: R/G/B/W Learn More
Button: (1) Factory-reset
NFC Frequency: 13.56 MHz
NFC Read Range: < 30 mm (1.18'')
NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
PoE Cabling Requirements: Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at t...
Specifications: SUPPORTED DEVICES
Setup Requirement: Requires Ring Alarm or Alarm Pro (sold separately)
Features: POWER AND CONNECTIVITY
Power: 2 CR2032 Coin cell batteries
Battery Life: Uses two CR2032 batteries, included, which may last up to 3 years depending on usage. Cold temperatures may drain battery life faster.
Operating Conditions: 32 degrees F to 120 degrees F (0 degrees C to 49 degrees C)
Connectivity: Z-Wave (250-foot range to Base Station open air, line of sight)
INSTALLATION:
Operating Conditions: Indoor use
Mounting: Mounts to doors and windows
Maximum Distance Between Magnet and Sensor: 1 inch. Leave 1/2" space on non-magnet side to access battery compartment.