3 Speed Ceiling Fan Remote Control for Harbor Breeze
It brings great convenience to our life !
It adds remote control compatibility to any fan.
This ceiling fan remote control works for most 110V 3-speeds AC ceiling fans, compatible with Harbor breeze which is works at the frequency of 315MHz.
This remote controller is designed for 3-speed ceiling fan to separately control your ceiling fan speed and light brightness.
There are four buttons (HI, MED, LOW, OFF) to control the speed of the fan and off, and one button to control the light on/off/dimmer.
Please note that this remote not have the Reverse button. But it is suitable for ceiling fans with reverse function.
Light Delay Off Mode: This remote control also has a departure delay function, which can turn on the light and then turn it off after 30 seconds, allowing you to travel with light and not have to run to turn the light on and off.
Ceiling Fan Remote Control with Ligth Dimmer
With the remote control, you can easily adjust the brightness of your lights to meet your daily needs. The dimming range of 1%-100% ensures that you have full control over the light intensity.
Adjustable Fan Speed
The ceiling fan control offers 3 different fan speeds, each designed to provide optimal comfort without any distracting noise. Choose from low, medium, or high speeds to create the perfect atmosphere in any room.
Widely Compatible Ceiling Fan Remote Control
This RC-92T remote is NOT universal.
The frequency of our RC-92T remote is 315MHz, and it can replace the FCC ID/MODEL as below:
A25-TX013/A25TX013,
A25-TX001-R1/A25TX001R1,
ZJF-RT01A/ZJFRT01A,
A25-TX005R /A25TX005R
If this replacement works on a different frequency than your original remote, it can not replace your original remote even they looks very similar.
Please make sure the FCC ID/Model of your original remote is suitable before purchasing.
D/CFL Switch for Different Light Bulbs
Switch should be set to“CFL”to correspond with standard non-dimmable bulbs;
Set to“D” for incandescent and other dimmable bulbs.
LEARN KEY button
Pair the Remote With a Compatible Receiver
How to set the function of learning button:
1. Cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary).
2. Within 30 seconds, press the "LEARN" button on the remote to pair.
3. The indicator light will flash. If paired successfully, fan will turn on low speed and light will be on.
Wide Compatibility
This ceiling fan remote control works for most 110V 3-speed AC ceiling fans.
Suitable for most downrod style fans, not recommended for use with hugger style fans.
Compatible with all incandescent light bulbs and some dimmable LED lamps.
Most LED lights and all CFL lights are Not dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function.
Notice
- If you have PULL CHAINS SWITCH or wall switch, before using the wireless remote control, use the PULL CHAINS SWITCH or wall switch to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
- If you are not sure whether our remote control is compatible with your old receiver, please purchase a complete kit with a receiver in our store.
3 Speed Ceiling Fan Remote Control for Harbor Breeze
It brings great convenience to our life !
It adds remote control compatibility to any fan.
This ceiling fan remote control works for most 110V 3-speeds AC ceiling fans, compatible with Harbor breeze which is works at the frequency of 315MHz.
This remote controller is designed for 3-speed ceiling fan to separately control your ceiling fan speed and light brightness.
There are four buttons (HI, MED, LOW, OFF) to control the speed of the fan and off, and one button to control the light on/off/dimmer.
Please note that this remote not have the Reverse button. But it is suitable for ceiling fans with reverse function.
Light Delay Off Mode: This remote control also has a departure delay function, which can turn on the light and then turn it off after 30 seconds, allowing you to travel with light and not have to run to turn the light on and off.
Ceiling Fan Remote Control with Ligth Dimmer
With the remote control, you can easily adjust the brightness of your lights to meet your daily needs. The dimming range of 1%-100% ensures that you have full control over the light intensity.
Adjustable Fan Speed
The ceiling fan control offers 3 different fan speeds, each designed to provide optimal comfort without any distracting noise. Choose from low, medium, or high speeds to create the perfect atmosphere in any room.
Widely Compatible Ceiling Fan Remote Control
This RC-92T remote is NOT universal.
The frequency of our RC-92T remote is 315MHz, and it can replace the FCC ID/MODEL as below:
A25-TX013/A25TX013,
A25-TX001-R1/A25TX001R1,
ZJF-RT01A/ZJFRT01A,
A25-TX005R /A25TX005R
If this replacement works on a different frequency than your original remote, it can not replace your original remote even they looks very similar.
Please make sure the FCC ID/Model of your original remote is suitable before purchasing.
LEARN KEY button
D/CFL Switch for Different Light Bulbs
Switch should be set to“CFL”to correspond with standard non-dimmable bulbs;
Set to“D” for incandescent and other dimmable bulbs.
Pair the Remote With a Compatible Receiver
How to set the function of learning button:
1. Cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary).
2. Within 30 seconds, press the "LEARN" button on the remote to pair.
3. The indicator light will flash. If paired successfully, fan will turn on low speed and light will be on.
Wide Compatibility
This ceiling fan remote control works for most 110V 3-speed AC ceiling fans.
Suitable for most downrod style fans, not recommended for use with hugger style fans.
Compatible with all incandescent light bulbs and some dimmable LED lamps.
Most LED lights and all CFL lights are Not dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function.
Notice
- If you have PULL CHAINS SWITCH or wall switch, before using the wireless remote control, use the PULL CHAINS SWITCH or wall switch to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
- If you are not sure whether our remote control is compatible with your old receiver, please purchase a complete kit with a receiver in our store.