Doorbell Camera Wireless No Subscription Video Doorbell, Bidirectional Wake-up, Two-Way Intercom, 1080P Video, 4.3 Screen, 120° Angle, No APP, No WiFi

How to work 2-way audio:

1.If ring the doorbell, the doorbell will connect with monitor, then press the dial key to start the 2-way audio.

2.The doorbell requires no action. Presses and hold the dial key to speak, release it to send your audio and receive the audio from your visitor. It is similar to how a walkie-talkie works.

3.If no need to talk, press the dial key again to turn off 2-way audio.

Please Note:

1.The wall, window, metal door and so on, they will weaken the signal, please test and install the doorbell in a place with good signal.

2.It isn't motion activated. If no one presses the doorbell, it enters the standby mode, and the monitor can activate the doorbell camera.

3.The doorbell camera automatically capture and record a video for 20-25 second when ring the doorbell(with a TF card inserted).

4.There is the echo if the monitor is too close to the doorbell, please move them away or lower the volume.

5.Please note that the monitor need to be charged with a 5V charger(not included) and USB cable.

Specifications:

Lens module: GC1084

Screen size: 4.3 inch IPS screen

Resolution: 640 * 480; HD high definition

Viewing angle: 120°

Night vision type: IR night vision

Battery of monitor: 400 mAh Li-ion battery, need to be plug in

Battery of doorbell: 4000 mAh Li-ion battery

Working time of Doorbell´s battery: About 3 months

Charging time of Doorbell´s battery: 2-3 hours by DC5V 1A/1.5A charger

Transmission protocol: 2.4G Bluetooth, 433MHz

Connection distance: 16.4ft-164ft/5m-50m if no obstacle, 16.4ft-66ft/5m-20m if there are obstacles

Storage mode: Built-in storage + TF card (support 8G-32G TF card)

External antenna: Support, increased reception distance

Operating voltage: DC5V/1A

Power interface: USB/type-C

Package list:

1*Doorbell

1*Monitor

1*3M adhesive

1*USB cable

1*Backplate

1*Screw set

Product information