Ceiling Fan Switch Zing Ear ZE-109,Two-Wire On-Off Light Switch for Hunter Ceiling Fans Lamp and Wall Lights Replacement (Bronze Pull Chain)

Generic Brand Zing Ear ZE-109 Ceiling Fan Light Switch

Replace a worn or nonworking light control with a compact 2-wire on/off pull chain switch. The ZE-109 is intended for compatible ceiling fan light kits, canopy lamps, lamps, and wall lights that use the same switch type, wiring configuration, and electrical rating.

Key Features

• 2-wire on/off switching for straightforward light control
• Pull-chain operation for compatible ceiling fan lights and lamps
• Electrical rating: up to 6A at 125VAC or 3A at 250VAC
• Approximately 10 cm (3.9 in.) pull chain
• Approximately 3 mm bead diameter
• Plastic switch housing with a bronze-tone beaded chain

Compatibility

This replacement part may fit many ceiling fan light assemblies, but compatibility is determined by the original switch model, number of wires, circuit function, dimensions, and electrical rating. Confirm that the existing switch is a Zing Ear ZE-109 or an equivalent 2-wire on/off switch before ordering. Brand-specific fit is not guaranteed unless these specifications match.

Installation Notes

Turn off electrical power at the breaker before beginning. Record or photograph each original wire position before removing the old switch, then connect the replacement in the same configuration. Make sure the pull chain cannot contact fan blades and does not rest against a lamp or glass shade. If you are unfamiliar with electrical wiring, use a qualified electrician.

Important: This switch controls an on/off light circuit. It is not described as a multi-speed fan control. Package quantity and certification status should be confirmed from the product packaging or seller documentation.

Frequently Asked Questions

Is the ZE-109 a fan-speed switch or a light switch?

It is described as a 2-wire on/off switch for compatible ceiling fan lights, lamps, and wall lights. It is not presented as a multi-speed fan control.

How do I know whether this ceiling fan pull chain switch will fit?

Compare the original switch model, 2-wire configuration, on/off function, physical dimensions, and ratings of 6A at 125VAC or 3A at 250VAC before purchase.

How long is the included pull chain?

The supplied product information lists the pull chain at approximately 10 cm, or 3.9 inches, with beads approximately 3 mm in diameter.

What should I do before installing the replacement switch?

Disconnect power at the breaker and record the original wire positions. Keep the installed chain away from fan blades, lamps, and glass, and consult a qualified electrician if you are uncertain about wiring.