3M Bumpon Self-Adhesive Protectors [Hexagon]: 0.433 in. width x 1/8 in. thick (Light Brown) *132-pack

3M Bumpon Hexagonal Self-Adhesive Protectors are foam bumpers designed to be used as feet, stops and spacers. These soft foam, die-cut rollstock protectors are used in woodworking where a softer material is preferred. They feature a plasticizer-free, urethane composition which exhibits easy application with 3M Pressure Sensitive Adhesives and high skid-resistance. The use of 3M Bumpon Protective Products help to reduce vibrations and noise and won't scratch surfaces.

Please note: some sizes are not sold in a retail pack. To verify the brand, you can see the 3M logo watermark printed on the back of the sheet. Country of Origin: United States.

1. Apply to any smooth flat unified surface such as glass, metal wood, smooth plaster, tile, etc.
2. For best results surfaces must be clean and dry. Clean with a low-strength solvent like isopropyl alcohol, (rubbing alcohol) or heptane (white gas) with a clean cloth.
3. Do not attempt to use on fabric, coarse concrete walls, rough sand finishes, loose paint or rough wallpaper.
4. Remove from liner from back of bumper. Avoid touching adhesive with fingers. Place the bumper on the desired location and PRESS FIRMLY to insure contact of the adhesive.