Solar Post Cap Lights, Warm White & RGB Automatic Cycling, Cracked Glass Bulb, 20 Lumens lP65 Waterproof Fit 3.6x3.6 4x4 4.5x4.5 5x5 Wood Fence Post Solar Powered Lights White (1 Pack)

Our Solar Post Cap Lights

Solar post cap lights will provide decorative, functional, and classy landscape lighting that makes the outdoor space look attractive with proper lighting

Solar post light is a cost-effective method, they use sunlight as a power source, so you don’t have to spend money on its maintenance. The light fixtures can be fitted easily to any standard 3.6-5inch post caps and can be mounted securely on any flat surface like a deck or patio. Solar post cap lights have light sensors that will automatically turn on at dusk and turn off at dawn. On a full charge, the lights can last all night long. To lighten up the dark pathways, garden, yard, or outdoors of your house. Apart from that, they also enhance the security surrounding your project

Solar Function: The built-in solar panels convert sunlight into electricity. The rechargeable battery stores the energy and converts the power into light for use during the night. The lighting hours of the solar light depends on the geographical location and weather condition. Stronger or longer exposure to sunlight enables the battery to store more energy and provide longer lighting hours

Crackle Glass Design: High-quality crystal glass comes with high transmittance. That provides unique decorative patterns

Rechargeable Battery: This product contains a 1pc 1.2V AA 1000mAh rechargeable battery for each. When the battery expires, it must be recycled or disposed of properly. Please contact your local waste disposal authority for the correct procedure. Do not put the battery on fire

Installation Location Choice: It is important to select an outdoor location with full, direct sunlight where the solar panel can receive at least 8 hours of sunlight each day. Shady areas will not enable batteries to be fully charged. This will reduce the lighting hours at night. It is also important to avoid placing the solar light by light sources (such as streetlights or porch lights, which may cause the solar light to turn off automatically). The solar light is designated for outdoor usage and is ideal for night lighting in gardens, paths, etc

Cleaning and Maintenance: Please use a damp cloth to clean the solar panel. Do not use any chemical or abrasive cleaner. It is important to ensure that no moisture enters the solar light

Precautions for use:

1. 2 Light Mode: RGB & warm white (3000 kelvin) with wide-angle LEDs of 20 lumens that makes it last for 100,000 hours without replacing any bulbs
2. Battery: AA rechargeable battery (1000 mAh) and advanced high-efficient monocrystalline solar panel. It works with a run time of about 8-10 hours battery life after getting 6-8 hours of charging under direct sunlight. There is no need for maintenance and all you need is to wipe it off simply with a damp cloth
3. Material: Superior quality sturdy ABS plastic with a white-coated finish, so they should be capable of withstanding harsh weather conditions like extreme heat, snowfall, and heavy rainfall. So, it is obvious that the materials used for manufacturing should be durable and strong
4. Base Adapter: This post cap style will fit 3.6×3.6\4.0×4.0\4.5×4.5\5.0×5.0(wood posts, PVC deck posts, & vinyl fence posts) and be installed on the garden corners, mailbox post, steps, pathways, pool deck, and boat dock, etc

SL1688 White Solar Post Cap Lights Q & A

Q: What kind of posts are solar post cap lights suitable for ?

A: Suitable for vinyl fence post, wood post, PVC deck post.

Note: The installation of solar post lights requires the use of screws and is not suitable for metal posts

Q: What size wood post does solar post cap lights fit?

A: Suitable for 3.6"x3.6"/4"x4"/4.5"x4.5"/5"x5" wooden posts. Need to add spacers for 3.5"x3.5" wooden posts. Semi-flush mount

Q: What is the brightness of solar post lights? What color are the mounting screws for solar fence post lights?

A: 20 lumens. Silver

Q: Can solar post cap lights be installed in a flat position on a deck railing? Or can it only be mounted on pillars?

A: It can be placed in a flat position or installed on a pole

Q: Is the RGB mode color of solar post cap lights flashing or soft color transition?

A: Soft color transitions

Q: Has AEFRELEOHT launched new solar post cap lights that can be fixed in color?

A: Yes,B0CR1DMSGM,Warm White/Red/Blue/Purple/White/Green/Yellow/Pink/Orange 9 colors to choose

Q: What should I do if I receive damaged solar post cap lights?

A: Our staff will help you replace the damaged solar post cap lights

Mode One: Warm White

Mode Two: RGB

Precautions for use:

• Make sure the switch is on RGB or WHITE position, rather than on OFF position.
• Check the rechargeable battery and make sure that it is in contact with the metal plate and the polarity is correct. If the battery is worn out, replace the battery with a new AA 1000mAh rechargeable battery.
• Always keep the solar light distant from other night light sources, such as exterior lights. Reposition the light to avoid close contact with other night light sources.
• Make sure the solar panel is clean and free of dirt and debris. If needed, use a damp cloth to clean the solar panel. Do not use any chemical or abrasive cleaner. It is important to ensure that no moisture enters the solar light.

Are solar post cap lights suitable for Christmas?

Of course, the RGB mode of solar post cap lights has a good decorative effect, and the lights can add to the festive atmosphere

Benefits of Using Our Solar Post Cap Lights

1. They are perfect to install outdoors as the light illumination will be helpful to walk or move around during the night
2. It will also discourage any potential thefts as well
3. Less maintenance, and power are some major advantages of solar post lights. They are a reliable source of providing light throughout without depending on electricity or power consumption
4. Solar post lights use LEDs instead of normal bulbs, so they last much longer even if they are recharged regularly
5. Energy saving due to solar post cap lights using sunlight to power the lights
6. Due to the usage of reliable solar energy, they will provide constant light around your home, even during power outages or emergencies.
7. The classy and modern design of these lights will make them perfect for landscaping and decoration purposes. Apart from just providing illumination, they add a sophisticated touch to the outdoors. They come in several designs and color variations which add the perfect ambiance to your home
8. In-built sensors present in solar post lights will detect lights and enable the lights to turn on/off automatically. So, you don’t have to manually turn on every light by yourself
9. For installing solar post lights, you don’t need professional help. As they don’t have any wiring or additional requirements, you can easily install them. You have to just install them where sunlight is adequate

Instructions for use

Assembly Instructions

1. Before using solar post lights, you can download the “Installation Manual (PDF)” on the detail page "Product guides and documents"
2. Gently remove all parts from the package and lay them out on a smooth surface (the protective film on the solar panel needs to be removed before use).
3. Twist the "Solar Panel Unit" a 1/4 turn in a counterclockwise direction until it separates from the body, and remove the foam pad under the crackled glass bulb.
4. Slid the Switch underneath the “Solar Panel Unit” to select lighting according to your preference. RGB and WHITE for your option, but never on the OFF position.
5. Select the correct adapter size depending on the size of the post. Includes 3 adapters:

• 4.5” x 4.5”
• 4.0” x 4.0”
• 3.6” x 3.6” (Standard 3.5” x 3.5” wood posts require additional spacers for installation).
• Outermost base is suitable for 5.0” x 5.0” wood posts.

1. Place the body (indivisible) onto the post and mark with a pencil where you will need to pre-drill for Screws and Plastic.
2. Remove the body temporarily and pre-drill holes if necessary.
3. Replace the body onto the post and secure it with screws in 2 locations (each solar post cap lights are equipped with 2 screws and two pre-drilled fixing screws can be selected as needed).