Clean Install Plug and PlayThis dashcam GPS mirror cam power adapter is super easy to install, plug and play. It eliminates the need for dangling cables in the mirror area, simply plug the dash cam adapter into the auto-dimming power plugs, and plug the dash cam into a USB connection for a clean installation. Helps you get rid of unsightly wires and drive without distractions.
Applicable ModelsOnly for analog mirrors with 10-Pin Type H (two-row 5+5 pins). Not for digital mirrors or ribbon cables. Compatible with Hyundai Tucson 20162022, Elantra 20172023, Kona 20182023, Santa Fe 20192022, Sonata 20202022, Palisade 20202022; Kia Sportage 20172022, Sorento 20162022, Telluride 20182022, Forte 2019+, K5 2020+, Soul 2020+, Rio 2018+, Niro EV 20192022, Stinger 2020+.
Support 2 USB Outputs, Only One USB Buck Module IncludedThis dashcam adapter comes with two output connectors, each can be connected to a 12V to 5V step-down module, each supporting up to 5V 2A output, which is convenient for powering two devices at the same time, but there is only one USB buck module included in the package. You can choose to buy a separate 12V to 5V buck module later when you need it. It is recommended not to exceed 5V 2A, and a single dash cam GPS are about 0.6A.
Built-in USB to Hide Dash Cam Charger Adapter CableThe plug-and-play adapter quickly converts the power supply for the auto-dimming mirrors to the power supply for Garmin GPS, dashcams, radars, mirror cameras, car mount charger or any USB-powered gadget, clean install.
Worry-Free After-sale ServiceThe step-down module of the dash cam adapter has been tested for 5V 2A for 48 hours of continuous operation, which is safe and reliable. This dash cam installation kit includes Three shorty
USB cables: Mini USB, USB-C, Micro USBIf you need a longer USB cable, you can contact us.
Support CustomizationWe produce dash cam adapters that are suitable for all kinds of car models, from reading lights, driving assistance, rain sensors and other spare interfaces to take power, please search for " YQMAJIM", if there is no adapter suitable for your car model, you can contact us.
22AWG Tinned Pure Copper Thickened Automotive Cable This dash cam GPS Radar adapter uses 22AWG tinned pure copper thickened automotive special cable, which is high temperature flame retardant, good heat and cold resistance, high temperature resistance up to 200°C, not easy to age, safe and reliable, and has a long service life.
NoteThis adapter only works when the vehicle is started and does not provide continuous power. Please check your mirror connector before purchaseonly compatible with 10-pin Type H analog mirrors. Not for 12-pin, digital, or ribbon-style connectors.