Features: KW206 OBDII Code reader Function and Features :
1. Works on ALL OBD II Enabled vehicles, both Gasoline and Diesel cars - domestic and imported.
2. Features the unique patented One-Click Readiness Key for quick State Emissions readiness check and drive cycle verification.
3. Bright color coded LEDS indicators and built-in speaker provide both visual and audible tone for readiness verification
4. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
5. Easily determines the cause of the Check Engine Light(MIL)
6. Turns off Check Engine Light (MIL), clears codes and resets monitors
7. Enhanced OBD2 Mode 6 On Board Monitoring Test Results for Specific Monitored Systems.
8. Views freeze frame dataThe KONNWEI KW206 OBD2 / EOBD / CAN Car Diagnostic Scannersupports all 10 OBDII test modes on all OBDII compliant vehicles for ...
Features: KW650 Battery Load Tester Key Features
1. Strong Capacity: Works on 6V&12V batteries, battery ratings from 100 - 2200 CCA, also starter and alternator;
2. Test Multiple Battery Types: regular flooded, AGM flat plate, AGM spiral and gel;
3. Color screen, support both in-vehicle and out-of-vehicle test, no need to remove the battery;
4. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB;
5. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc;
6. Provide reliable results within seconds, display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;
7. Polarity reverses connection protection; reminder light
8. Support 12 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
9. Print data & Lifetime free update service;
10. Suitable for automobile fac...
Features: KW650 Battery Load Tester Key Features
1. Strong Capacity: Works on 6V&12V batteries, battery ratings from 100 - 2200 CCA, also starter and alternator;
2. Test Multiple Battery Types: regular flooded, AGM flat plate, AGM spiral and gel;
3. Color screen, support both in-vehicle and out-of-vehicle test, no need to remove the battery;
4. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB;
5. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc;
6. Provide reliable results within seconds, display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;
7. Polarity reverses connection protection; reminder light
8. Support 12 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
9. Print data & Lifetime free update service;
10. Suitable for automobile fac...
Features: Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mO) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
Features: Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mO) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
Features: KW650 Battery Load Tester Key Features
1. Strong Capacity: Works on 6V&12V batteries, battery ratings from 100 - 2200 CCA, also starter and alternator;
2. Test Multiple Battery Types: regular flooded, AGM flat plate, AGM spiral and gel;
3. Color screen, support both in-vehicle and out-of-vehicle test, no need to remove the battery;
4. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB;
5. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc;
6. Provide reliable results within seconds, display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;
7. Polarity reverses connection protection; reminder light
8. Support 12 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
9. Print data & Lifetime free update service;
10. Suitable for automobile fac...
Features: Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mO) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.