Quickly and Easily Install a 4-Wire and 7-Way Trailer Connector on your Vehicle with This Toyota Specific Wiring Kit
This multi-tow 7 RV blade/4 flat connector is designed to connect the trailer wiring system into vehicle's wiring system, it gives you both a 4-pin and a 7-way connector for various trailer towing options. If your vehicle is from the years of 2007 - 2013 Toyota Tundra and it did comes with the tow package and you are going to have a muliti-tow application then you can use this carrofix plug-In simple vehicle wiring kit. With the feature of plug and play, it would save you time effeciently by utilizing OEM connectors to create an exact fit for easy installation and maximum weatherproofing.
Lighting Up Your Trailer More Easier
Provides both a 7-way RV-style and a 4-pole flat connector at the back of your vehicle to power your trailer's signal lights
Utilizes OEM plugs for enhanced fit and ultimate weatherproofing
No cutting or splicing needed saving you valuable time
Protective connection terminals resist corrosion
Designed for use with a factory tow package
Includes mounting bracket and all hardware
Installation
Locate the 7-way wiring harness plugs at the rear of vehicle above the factory 7-way RV socket assembly, usually found over toward the drivers side frame member. This connector harness will have the same connector ends as the carrofix T-Connector.
Disconnect the vehicle 7-way RV wiring harness plugs. Connectors will disconnect by pressing or lifting on a locking tab and pulling apart.
Remove factory 7-way RV socket from vehicle 7-way mounting bracket.
Insert the Carrofix T-connector harness into the vehicle 7-way and 4-pin mounting bracket (Provided) and secure with mounting bolts (Provided).
Route the wire harness from the installed 7 way and 4 pin connector to the factory exsiting plugs. Connect the plugs making sure the connectors are fully inserted
Plug trailer connectors into 4-way and 7-way receptacles and test all functions with the engine running to ensure proper operation.
Tips: A heavy duty flasher may be required to eliminate rapid flashing.
This Product Will fit for the Following Models:
2007 - 2013 Toyota Tundra with factory 7-Way
Features - This part has two grey connectors to couple with the factory wiring, one is a 2-wire rectangular connector and the other a 5-wire square connector.