STRONG & STURDY
Increased mold guiding device, solid mold assembly, stable crimping performance. Combined with integral quenching technology, the jaws are strong and will not break.
HUMANIZED DESIGN
One-handed operation of the handle is more convenient, and one person can complete the crimping work independently.
ERGONOMIC STRUCTURE DESIGN
Non-slip and elastic, ergonomic structural design, crimp force large threaded handle sleeve.
STANDARD MOLD
Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
SHARP CABLE CUTTER
Cutting is as smooth as butter.
Hydraulic Crimping Tool Series
 12AWG~2/0AWG |  12AWG~2/0AWG |  12AWG~2/0AWG |  12AWG~2/0AWG |  12AWG~2/0AWG |  12AWG~2/0AWG |  8AWG~4/0AWG | |
|---|---|---|---|---|---|---|---|
Customer Reviews | — | — | — | — | — | — | — |
Price | — | — | — | — | — | — | — |
Cutter | ? | ? | ? | ? | ? | ? | ? |
Crimping range | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 8~4/0 AWG + 5/32" ~ 1/4" |
Dies Quantity | 9 | 9 | 9 | 9 | 9 | 9 | 8 |
MAX. Crimping Force | 10T | 10T | 10T | 10T | 10T | 10T | 12T |
Rated Crimping Force | 80KN | 80KN | 80KN | 80KN | 80KN | 80KN | 100KN |
Which die should I use to crimp 1/8" stainless wire?
Use the #6 or #8 dies to crimp 1/8" stainless wire cable.
Which dies should I use to crimp 3/16" stainless wire?
Use the #10 dies to crimp 3/16" stainless wire cable.
Which die should I use to crimp 2/0 awg cable?
Use the #70 dies to crimp 2/0 awg cable.
Why manual hydraulic pliers small piston lever oil leakage?
Oil leakage from small piston lever of manual hydraulic pliers is a common problem, which can be caused by aging seals, loose sealing surfaces, damaged sealing surfaces and so on.
How to repair a tool that is leaking oil and use it properly?
1. Replacement of seals.
2. Repair the sealing surface.
3. Replace the lever.
STRONG & STURDY
Increased mold guiding device, solid mold assembly, stable crimping performance. Combined with integral quenching technology, the jaws are strong and will not break.
HUMANIZED DESIGN
One-handed operation of the handle is more convenient, and one person can complete the crimping work independently.
ERGONOMIC STRUCTURE DESIGN
Non-slip and elastic, ergonomic structural design, crimp force large threaded handle sleeve.
STANDARD MOLD
Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
SHARP CABLE CUTTER
Cutting is as smooth as butter.
FOR BATTERY CABLES
Essential tools for repairing battery cables
FOR CABLE RAILING
Hydraulic Crimper for Stainless Steel Cable Railing Hardware
CIRCUIT REPAIR
Good helper for repairing circuits
Hydraulic Crimping Tool Series
12AWG~2/0AWG | 12AWG~2/0AWG | 12AWG~2/0AWG | 12AWG~2/0AWG | 12AWG~2/0AWG | 12AWG~2/0AWG | 8AWG~4/0AWG |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Cutter | ||||||
| ? | ? | ? | ? | ? | ? | ? |
| Crimping range | ||||||
| 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 12~2/0 AWG + 1/16" 1/8" 3/16" | 8~4/0 AWG + 5/32" ~ 1/4" |
| Dies Quantity | ||||||
| 9 | 9 | 9 | 9 | 9 | 9 | 8 |
| MAX. Crimping Force | ||||||
| 10T | 10T | 10T | 10T | 10T | 10T | 12T |
| Rated Crimping Force | ||||||
| 80KN | 80KN | 80KN | 80KN | 80KN | 80KN | 100KN |
Which die should I use to crimp 1/8" stainless wire?
Use the #6 or #8 dies to crimp 1/8" stainless wire cable.
Which dies should I use to crimp 3/16" stainless wire?
Use the #10 dies to crimp 3/16" stainless wire cable.
Which die should I use to crimp 2/0 awg cable?
Use the #70 dies to crimp 2/0 awg cable.
Why manual hydraulic pliers small piston lever oil leakage?
Oil leakage from small piston lever of manual hydraulic pliers is a common problem, which can be caused by aging seals, loose sealing surfaces, damaged sealing surfaces and so on.
How to repair a tool that is leaking oil and use it properly?
1. Replacement of seals.
2. Repair the sealing surface.
3. Replace the lever.