IPX7 waterproof battery monitor
The smart battery monitor with multiple functions.
- IPX7 Waterproof,It can be used indoor and outdoor.
- The battery monitor not only can test voltage but also remaining capacity of battery and temperature (short press"M" key to switch temperature and voltage).
- The battery monitor can set low and high voltage Buzzer alarm.
- The battery monitor testing range is 7-100V and can be used for 12v 36v 48v 60v 72v 84v batteries including Ternary lithium battery, lead-acid battery, LifePO4 battery etc.
- The battery tester with power-off memory function, it can retain settings when power is removed.
- The battery can be used for car, motorcycle,golf cart, boat ,electric bikes etc.
NOTE:
- The temperature shows Celsius, not Fahrenheit.
- You must be make a simple set follow the instruction after getting to the product.otherwise the capacity of battery will always show 100%!
- Color LCD display with black mounting bracket.
- Package contents including:1X battery monitor,1X black mounting bracket,1X (Screw and nut),1X double-side tape 1X manual.
- The Double-Sided tape is sticked between the battery monitor and the bracket when you mounting.
- The Hole Diameter of bracket is 10mm(0.4inches).
- The battery monitor Product Dimension is 64*36*15.3mm(2.5*1.4*0.6inches).and the Install Dimension is 58*28mm(2.28*1.1inches).
- The shell designed with buckles if you open hole install it.
Buzzer alarm and temperature
- Built-in temperature sensor,press "M"button can display the temperater of environment(short press"M" button to switch temperature and voltage).
Detail
- The wires length are 23.62inches(60cm).
Back of product
- The back of battery monitor is fully closed and flat, The red wire for the positive and the black wire for the negative of the battery. you can open hole installing it or use the double-sided adhensive we provided stick on the back of product
Application
- The battery tester can be used for Ternary lithium battery,lead-acid battery,lithium iron phosphate etc. Default 12v volt lead- acid battery
waterproof
- IPX7 Waterproof,dustproof,It can be used indoor and outdoor.
How to connect the wires
- The red wire connect to the positive and the black wire connect to the negative of battery.
- Positive and negative input reverse connection protection.
- The wires length are 15.75inches.
Specification
Q&A
1.Does the battery monitor come with a battery? Is it easy to wire??
A.No, the battery monitor does not include a battery. Simply connect the red wire to the positive terminal and the black wire to the negative terminal of the battery for display.
2.Is setup required after receiving the product??
Yes, the battery monitor is compatible with all battery types (7-100V), but you must follow the instructions to make a simple set it based on your battery type. If your battery is not listed in the manual, you can customize settings. Without setup, the voltage will display normally, but the battery capacity will remain at 100%.
3.Is the battery monitor waterproof? What is its waterproof rating??
Yes, the battery monitor is waterproof with an IPX7 rating. It can be submerged in water for up to 72 hours even longer without damage.
4.Do 12V lead-acid batteries require manual set?
No, the default setting is for 12V lead-acid batteries, but as the battery aging, you can need to customize settings to make the percentage display more accurate.
IPX7 waterproof battery monitor
The smart battery monitor with multiple functions.
- IPX7 Waterproof,It can be used indoor and outdoor.
- The battery monitor not only can test voltage but also remaining capacity of battery and temperature (short press"M" key to switch temperature and voltage).
- The battery monitor can set low and high voltage Buzzer alarm.
- The battery monitor testing range is 7-100V and can be used for 12v 36v 48v 60v 72v 84v batteries including Ternary lithium battery, lead-acid battery, LifePO4 battery etc.
- The battery tester with power-off memory function, it can retain settings when power is removed.
- The battery can be used for car, motorcycle,golf cart, boat ,electric bikes etc.
NOTE:
- The temperature shows Celsius, not Fahrenheit.
- You must be make a simple set follow the instruction after getting to the product.otherwise the capacity of battery will always show 100%!
- Color LCD display with black mounting bracket.
- Package contents including:1X battery monitor,1X black mounting bracket,1X (Screw and nut),1X double-side tape 1X manual.
- The Double-Sided tape is sticked between the battery monitor and the bracket when you mounting.
- The Hole Diameter of bracket is 10mm(0.4inches).
- The battery monitor Product Dimension is 64*36*15.3mm(2.5*1.4*0.6inches).and the Install Dimension is 58*28mm(2.28*1.1inches).
- The shell designed with buckles if you open hole install it.
Buzzer alarm and temperature
- Built-in temperature sensor,press "M"button can display the temperater of environment(short press"M" button to switch temperature and voltage).
Detail
- The wires length are 23.62inches(60cm).
Back of product
- The back of battery monitor is fully closed and flat, The red wire for the positive and the black wire for the negative of the battery. you can open hole installing it or use the double-sided adhensive we provided stick on the back of product
Application
- The battery tester can be used for Ternary lithium battery,lead-acid battery,lithium iron phosphate etc. Default 12v volt lead- acid battery
waterproof
- IPX7 Waterproof,dustproof,It can be used indoor and outdoor.
How to connect the wires
- The red wire connect to the positive and the black wire connect to the negative of battery.
- Positive and negative input reverse connection protection.
- The wires length are 15.75inches.
Specification
| Measuring range | DC7-100V |
| Working current | <10MA |
| Product Dimension | 2.5*1.4*0.6inches |
| Install Dimension | 2.28*1.1inches |
| Display Mode | LCD |
| Product weight | 25g(0.88 ounce) |
| Operation Temp | 14F~140F |
| Measurement accuracy | 0.5% |
| Waterproof level | IPX7 |
Q&A
1.Does the battery monitor come with a battery? Is it easy to wire??
A.No, the battery monitor does not include a battery. Simply connect the red wire to the positive terminal and the black wire to the negative terminal of the battery for display.
2.Is setup required after receiving the product??
Yes, the battery monitor is compatible with all battery types (7-100V), but you must follow the instructions to make a simple set it based on your battery type. If your battery is not listed in the manual, you can customize settings. Without setup, the voltage will display normally, but the battery capacity will remain at 100%.
3.Is the battery monitor waterproof? What is its waterproof rating??
Yes, the battery monitor is waterproof with an IPX7 rating. It can be submerged in water for up to 72 hours even longer without damage.
4.Do 12V lead-acid batteries require manual set?
No, the default setting is for 12V lead-acid batteries, but as the battery aging, you can need to customize settings to make the percentage display more accurate.