Wide Voltage Input.Support 5V to 12V DC wide voltage input, for low power consumption and low power adapter requirements. Input Status Indicator.With input status indicator, clearly indicate the device usage status.Specification:Item: SDI 1 X 4 SplitterColor: BlackSMPTE Standard: 425M Level A&B, 424M, 292M, 259 M-C SDI Transfer Rate: 270Mb/s (SD), 1.485Gb/s (HD), 2.97Gb/s (3G) Input / Output ResolutionStandard Definition: 480i@60, 576i@50 HD: 720p@50/60, 1080i@50/60 3G: 1080p@24/25/29.97/30/50/59.94/60Audio Sample Rate: 48KHZ Input Port: 1 x BNC (SD / HD / 3G-SDI) Output Port: 4 x BNC (SD / HD / 3G-SDI) SDI Transmission Cable: input up to 100 meters and output up to 80 meters, input up to 80 meters and output up to 100 metersInput Voltage: DC5V-12V Maximum Power Consumption: 1.5W Human Body Mode ESD Protection: 8kV (air gap discharge), 4kV (contact discharge) Working Temperature: -10+55C Storage Temperature: -20+60C Working Humidity: 10-90% RH (no condensation) Storage Humidity: 5-95% RH (no condensation) Size: 125 * 66.5 * 22mm / 4.9 * 2.6 * 0.9inchesWeight: 192g / 6.8ozPackage Size: 17.5 * 12 * 5.7cm / 6.9 * 4.7 * 2.2inchesPackage Weight: 341g / 12.03ozConnection Diagram1 Connect the SDI camera output to the IN end of the splitter via the SDI line,2 Connect the OUT1-OUT4 end of the splitter to the input of the SDI display device via the SDI line.3 Finally connect the DC head of the power adapter to the DC input of the splitter, and then plug the adapter into the power outlet. This SDI splitter can distribute one SDI signal into four-way SDI signals, that is, the output interface can connect four SDI display devices and display the same picture. The input end has an internal equalizer, which can realize long-distance transmission. This product can be used in places where noise, transmission distance and safety are limited, data center control, information distribution, remote monitoring, conference room presentations, and digital environments and corporate training venues. With is, multiple distributors can be connected to achieve long-distance, multi-interface expansion.Features:Widely Used in Various Places.Can be used in places where noise, transmission distance and safety are limited, data center control, information distribution, remote monitoring, conference room presentations, and digital environments and corporate training venues.HD & Real-time Display.High definition, high fidelity, no delay, showing every detail.Multiple Resolution Supported.Supports 480i@60, 576i@50 (standard definition), 720p@50/60, 1080i@50/60 (HD), 1080p@24/25/29.97/30/50/59.94/60 (3G).Audio & Video Synchronization, Lossless Transmission.Adopts 24bit/192KHz DAC chip to ensure high quality sound quality (the splitter only supports 48khz audio sample rate).