Specifications: Hard Drive Form Factor Compatibility: 2.5"
Supported Interface: U.3 NVMe x1 / SATA-600 / SAS 4.0
Features: Front, tri-mode
Processor: No CPU
Bays: 8 x hot-swap - 2.5" SFF
Interfaces: 8 x U.3 NVMe x1 / SATA 6Gb/s / SAS 24Gb - U.3 (SFF-8639)
Specifications: Controller: ASPEED AST2500
Feature: Base Board Management Controller (IPMI2.0 with iKVM support)
VGA (1920x1200@60Hz 32bpp)
Memory: 2 SPI flash ROM 32MB
1 DDR4 SDRAM 4Gb
Physical Status
Form Factor: Low profile PCIe add-in-card
Dimensions: 168.45 x 68.9 mm
I/O
Upstream interface: PCI Express2.0 x1
External: 1 RJ45 via Realtek RTL8211E for dedicated IPMI LAN (10/100/1000 Mbps), 1 DB-15 (VGA)
Internal connectors: 2 SMBus header
1 x PMBus header
1 x IPMB header
1 x BMC reset
1 x BMC debug header
1 x V BIOS or system BIOS ROM
2 x BMC ROM
1 x Dual ROM select header
1 x TPM (13-pin, LPC)
1 x LPC header (13-pin)
2 x Fan header
1 x USB2.0 (5-pin): KVM and standby power
1 x header (18-pin): GPIO, NCSI
1 x header (18-pin): case open, system fail, GPIO, SMBus, PECI, voltage monitoring
1 x COM port (9-pin)
1 x micro-SD connector
1 x ...
Specifications: Distance: 100 m
Data Rate (max): 103.1 Gb/s
Protocol: 100G Ethernet Compliant
Low End Case Temperature (degree C): 0
High End Case Temperature (degree C): 70
Diagnostics: Digital
Transmitter: 4x SWDM VCSEL
Receiver: PIN
Voltage Supply: 3.3
Connector: LC
Wavelength: 850nm Band
Specifications: Form Factor: SFP+
Distance: 300 m
Protocol: 10 Gb/s Fibre Channel Compliant, 10 Gigabit Ethernet Compliant
Data Rate (max): 10.5 Gb/s
Low End Case Temperature (°C): 0°C
High End Case Temperature (°C): 70°C
Diagnostics: Digital
Transmitter: VCSEL
Receiver: PIN
Voltage Supply: 3.3
Connector: LC