Speed: Max Ascent Speed: 5 m/s
Max Descent Speed: 3.5 m/s
Max Horizontal Speed: 16 m/s
Measured in a controlled wind tunnel environment under conditions equivalent to windless operation and sea-level altitude, with the aircraft ascending vertically to a height of 1.5 meters above the ground in Sport mode. Actual experience may vary depending on the environment, usage, and firmware version.
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Features: K2 PRO SPECIFICATIONS:
Printing Technology: Fused Deposition Modeling
Build Volume: 300 x 300 x 300 mm
Printing Speed: Max 600 mm/s
Acceleration: Max 20000 mm/s2
Printing Accuracy: 100±0.1 mm
Layer Height: 0.05-0.3 mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm
Nozzle Temperature: Max 300 °C
Heatbed Temperature: Max 110 °C
Chamber Temperature: Max 60°C
Build Plate: Flexible PEI build plate
Leveling Mode: Full-auto leveling
XYE Motor: Step-servo motors for XY axis and extruder
File Transfer: USB Drive/Ethernet/WiFi
File Storage: 32GB EMMC
RFID Sensor Printer: Included
Rated Voltage: 100-240V ~ AC 50/60 Hz
Display Screen: 4" color touch screen
Rated Power: 1300W
Supported Filaments: PLA...