Compatibility: MV-TILT1 supports flat panel displays measuring up to 24 inches diagonally and weighing up to 40 pounds
Specifications: 2.0mm cold-rolled steel board and durable powder coated finish
VESA 75 x 75mm to VESA 100 x 100mm
Supports up to 40 lbs. (18 kg)
Allows tilt function at -15º,-7.5º,0º
Includes installation guide, hardware kit
Master carton weight: 32 lbs. (14.64 kg)
Master carton dimensions: 19.2"L x 10.2" W x 9.4"H
Connectors: Stereo Audio Line In - Audio
Audio In - Microphone
Docking Port - iPod
Audio: 10 Watts RMS - Full range 5" Driver
One Wired Metal body Mic with Switch
Line in mini jack with Volume Control
Mic in Combo Jack with Volume Control
Adjustable Talkover with Switch Off mode
Master Volume with Power Off/On
Power Requirement: Battery Powered – 1 x pc Rechargeable Battery, AC adaptor included
Audio: Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise: 12 dB SPL
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style: R5
Compatibility: Up to 63"
Max. weight capacity 200 lbs.
Compatible with MWRIW, PWRIW and PNRIW
Specifications: Improved electrical
Larger conduit knockouts for easier cable integration
Now includes a RACO-style single junction electrical box
simplified installation
Pre-assembled Chief swing arms with no disassembly for easy integration
Takes a Chief on-wall arm and makes it in-wall for the ultimate flush appearance