Specifications: Standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
Device Interface:
1 x Gigabit PoE/PoE+ in port
1 x Gigabit PoE/PoE+ out port
1 x Power port (optional power adapter is not included)
LED indicators
Installation mounting points
Data Transfer Rate:
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Power:
Powered by PoE/PoE+ Device
Consumption: 2 Watts (max.)
Features: • 4 x Gigabit PoE++ ports
• 4 x Gigabit PoE+ ports
• 2 x Gigabit Share ports (SFP or RJ-45)
• 360W power budget
• 20Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-Rail and wall mounts
• Extreme operating temperature range of -40° – 75° C (-40° – 167° F)
• Dual power
Primary Ports: 8 x Gigabit PoE+ ports
2 x Gigabit SFP slots (1000Base-FX)
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Network Media: Media Type Supported:
Twisted Pair
Ethernet Technology:
Gigabit Ethernet
Network Technology:
1000Base-T
Uplink Interface: Total Number of Network Ports:
5
Network (RJ-45):
Yes
Port/Expansion Slot Details:
4 x Gigabit Ethernet PoE+
1 x Gigabit Ethernet Network
Primary Ports: 8 x Gigabit PoE+ ports
2 x SFP Slots
LED indicators
LED Display mode button (toggles LED indicators to display link/activity or PoE only port status)
Features: • 16 x Gigabit PoE+ ports
• 240W PoE power budget
• 32Gbps switching capacity
• Power supply sold separately (models: TI-S24052, TI-S24048, TI-S48048)
• Hardened IP30 rated metal switch
• Includes DIN-rail and wall mounts
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• Dual redundant power inputs with overload current
Network Management Type: HTTP web-based GUI
CLI: Telnet / SSHv2
SNMP v1, v2c, v3
SNMP trap (up to 5 receivers)
RMON groups 1/2/3/9
Device configuration backup & restore, upgrade firmware, reboot, and reset to default
Multiple administrative or read-only user accounts
Enable or disable power saving mode per port
Static MAC entries
LLDP (Link layer discovery protocol)
Netlite device map
ONVIF device discovery
SNTP
SMTP alert
Syslog
Port statistics/utilization
Traffic monitor
Port mirror: one to one, many to one
Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
Loop...
Primary Ports: 4 x M12 (X-code) Gigabit PoE+ ports
1 x M12 (X-code) Gigabit port
1 x M12 (A-code) power port
LED indicators
Wall mount
Din-Rail mount
Grounding point
Primary Ports: 8 x Gigabit ports
2 x Gigabit Ethernet ports
2 x Shared SFP slots
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Network Media: WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
NAT Loopback Enable/Disable
NAT Modes: NAT, PAT, One-to-One NAT
VLAN tag assignment on WAN interface
IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6),...
Features: • IP30 rated industrial power supply with integrated DIN-rail mount
• Provides up to 120 Watts of power (48 V, 2.5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (91%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C