Specifications: DIMENSIONS: 18 x 44 x 120.5 mm (0.71" x 1.73" x 4.74")
DISPLAY:
- Rated Voltage: 5V
- Power Input: 14W
- Display Type: 3.9" TFT-LCD
- Display Resolution: 128 x 480 (RGB) px
DISPLAY SUPPORT
- Interface: Micro USB to USB (9 PIN)
- System Compatibility: Windows 10/11
Specifications: Chassis Support: For Phanteks NV9 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
Specifications: Chassis Support: For Phanteks NV7 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
Specifications: Lighting Node PRO
Power input: 4.5V to 5.5V
Unit dimension: 55mm x 31mm x 12mm
RGB LED channels: 2
Max. RGB LED strip per channel: 4
Mini USB cable: 375mm
SATA Power cable: 440mm
HD RGB LED hub cable 485mm
Individually Addressable RGB LED strip
Length: 410mm
RGB LED chip count: 10
Protective cover: IP65-rated transparent silicone
Adhesion type: 4 magnets per strip and full-strip tape
RGB extension cable: 345mm
Specifications: Weight Capacity: 50 lbs (22.7 kg)
Maximum CPU Dimensions: 18" x 8.5" (457 x 216 mm)
Minimum CPU Dimensions: 9.4" x 2.6" (239 x 66 mm)
Mounting Options: Directly to wall; under desk; to Ergotron Wall Track (interface bracket required, 97-091); to Ergotron Command Post (interface bracket required, 60-366); to 2" round pole (interface bracket required, 60-131-003); on Ergotron Mobile WorkStand Cart (interface bracket required, 60-131-003); on Ergotron LX Large Display Cart or Neo-Flex Mobile MediaCenter; on Neo-Flex Laptop and LCD Carts; on StyleView SV40/41/SV42 EMR Carts and StyleView SV32 PHD Carts
Specifications: Description: Vertical Small CPU Holder (black)
Includes CPU holder, bumpers
CPU Size Range: 1-3/8" to 3-3/4" (35 to 95 mm) wide; accommodates most small form factor and ultra small form factor CPUs
Weight Capacity: 50.00 lbs.
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory (ordered separately) is recommended
Specifications: IMPORTANT NOTE: This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis.