DIY Cooling

• Brand: Thermal Grizzly
• Part Number: TG-DM-FIT-0003
• Type: Liquid Cooling System
• Color: Black
• Model #: TG-DM-FIT-0003

Limited time offer, ends 08/30

• Type: M.2 Heatsink NVMe SSD PS5 Heat Sink
• Model #: BL-M2CL-PT

Limited time offer, ends 08/31

• Type: Fan power cable
• Type: PWM 4pin fan hub splitter
• Color: Black
• Length: 16inches / 40CM
• Model #: PWMHUB10S

Limited time offer, ends 08/26

• Model #: M.2-SSD Heatsink

• Type: Fittings
• Model #: 14927

Limited time offer, ends 08/31

• Model #: 11-001-061

• Type: Coolant
• Coolant Capacity: 500ml
• Model #: BPTA-CMCD500

• Brand: Bitspower
• Type: Liquid Cooling System
• Model #: BP-MBDG14AALPII

(1)

• Type: Tubing
• Model #: BPM-DTB

• Brand: Thermal Grizzly
• Part Number: TG-DM-FIT-0008
• Type: Liquid Cooling System
• Color: Black
• Model #: TG-DM-FIT-0008

• Type: CPU Block
• Model #: PC-PURE

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: VGA Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
• Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
• Model #: 11-001-128

• Type: Fittings
• Model #: 14882

• Type: Fittings
• Model #: BP-ILF-BS

• Brand: Thermal Grizzly
• Model: TG-DP-002-R
• Part Number: TG-DP-002-R
• Color: Grey
• Model #:

• Brand: Thermal Grizzly
• Model: TG-ASH-050-RT
• Part Number: TG-ASH-050-RT
• Color: Red
• Model #:

Limited time offer, ends 08/30

• Block Material: Aluminum
• Color: Black
• Model #: BL-M2CLRGB-B

• Type: Soft tube
• Tube Dim.: 3 meter
• Tube Material: PVC
• Package Contents: PH-GEF_ST16_CL 1x
• Model #: PH-GEF_ST16_CL

• Block Compatibility: M.2 length support: 2280 (22mm x 80mm)
• Type: Cooling kit
• Block Dim.: Heatsink : 70mm (W) x 10mm (H) x 20mm (D), 16.1g Blue Pad : 70mm (W) x 1mm (H) x 20mm (D), 3.25g Gray Pad 1 : 60mm(W) x 1mm(H) X 20mm(D), 2.8g Gray Pad 2 : 60mm(W) x 1.5mm(H) X 20mm(D), 3.7g Thermal pad thickness: 1.0mm, 1.5mm
• Block Material: Aluminum, silicone
• Model #: SST-TP02-M2

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Brand: Alphacool
• Part Number: 1011115
• Type: Liquid Cooling System
• Color: Red
• Model #: 29115

• Brand: Thermal Grizzly
• Model: TG-AR-100
• Part Number: TG-AR-100
• Color: Clear
• Model #:

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Brand: Thermal Grizzly
• Model: TG-MP8-120-20-10-1R
• Part Number: TG-MP8-120-20-10-1R
• Color: Pink
• Model #:

• Model #: BPM-AT45R-WH

• Brand: Thermal Grizzly
• Model: TG-MP8-100-100-05-1R
• Part Number: TG-MP8-100-100-05-1R
• Color: Pink
• Model #:

Limited time offer, ends 08/31

• Model #: 11-001-195

• Type: Fittings
• Model #: 14918

• Model #: BP-TBRG-2P

(5)

Limited time offer, ends 08/30

• Parts: 1 Year
• Labor: 1 Year
• Model #: Heatsink880X

• Brand: Thermal Grizzly
• Model: TG-CW-10
• Part Number: TG-CW-10
• Color: White
• Model #:

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

Limited time offer, ends 08/30

• Part Number: AD-M2CL2PC
• Type: cooler
• Features: Features : Copper Heatsinks Cooling Fin for M.2 2280 SSD Main Body Material: 100% copper, cut andpolished,High performance Thermal Heatsink; Suitable for NVME M.2 SSD Laptop, AHCI M.2SSD and Sata-based M.2 SSD Compatible PCIe NVMe M.2 SSD brand andmodels (List only part of them): - 850EVO / 860EVO / 960EVO /950PRO / 960PRO / SM951
• Package Contents: 2 x M.2 SSD HeatSink(Copper) 2 x m.2 thermal pads(0.5mm/1mm) 4 x Rubber Rings
• Model #: AD-M2CL2PC

• Model #: BPTA-DRGBMFC-V2

• Type: Fittings
• Model #: 17245

• Type: CPU Block
• Model #: 6932167210401