Thermal Compound / Grease

• Volume / Net Weight: 3.5g
• Long Term Operating Temperature: -50 to 130 C
• Specifications: Average Particle Size: < 0.49 micron < 0.000020 inch Extended Temperature Limits: Peak: -50 Celsius Degree to >180 Celsius Degree Long-Term: -50 Celsius Degree to 130 Celsius Degree Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
• Model #: AS5-3.5G

(637)

• Volume / Net Weight: 3.5g
• Thermal Conductivity: 3.8 W/mK
• Specifications: CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply. TM30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds. Net Weight: 3g Thermal Conductivity: 3.8 W/mK Thermal Impedance: 0.01°C -in2/W Viscosity: 2300K cPs Specific Gravity: 2.5g/cm3
• Model #: CT-9010001-WW

• Volume / Net Weight: 8.0g
• Thermal Conductivity: 8.5 W/mK
• Specifications: • Thermal Conductivity (W/mk): 8.5 • Viscosity (poise): 870 • Density (g/cm3): 2.5 • Net Weight: 8g • The ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU / GPU and designated coolers to transfer the dissipated heat from the components to the heat sink. Since the ARCTIC MX-4 is a metal-free compound, it eliminates the risks of causing short circuit and in turn adding more protection to your computer. The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components. The consistency of the ARCTIC MX-4 is designed for simple application. Its te...
• Model #: ACTCP00008B

• Thermal Conductivity: 14.2 W/mK
• Long Term Operating Temperature: -250 °C / +350 °C
• Model #: TG-KE-002 R

• Model #: ACTCP00084A

• Model #: TG-D-002

• Model #: k001 5 wipe combo

• Model #: Kryonaut 1g - TG-K-001-RS

• Model #: TG-KS-33-33

(26)

• Volume / Net Weight: 2.0g
• Thermal Conductivity: 14.0 W/mK
• Long Term Operating Temperature: -50 to 250 C
• Specifications: CryoFuze 2g Scraper Grease Cleaner
• Model #: MGZ-NDSG-N07M-R2

• Model #: TG-K-001-RS

• Specifications: Premium-grade thermal compound for optimal heat-transfer from the CPU or GPU to the heatsink
• Model #: NT-H2 3.5g

• Model #: TG-PS-50-40

• Model #: Honeywell PTM7950-40*40mm-A

• Model #: D002 Wipes Combo

• Model #: ACTCP00031B

• Model #: TG-KS-38-38

• Part Number: ACTCP00081A
• Model #: ACTCP00081A

• Model #: ARCTIC MX-6-2g

• Volume / Net Weight: 3.5g
• Long Term Operating Temperature: -50 to 110 C
• Specifications: Weight: 3.5 g Volume: 1,4 ml Density: 2,49 g/cm3 Colour: Grey
• Model #: NT-H1

(19)

• Part Number: CT-9010010-WW
• Volume / Net Weight: 3.0g
• Model #: CT-9010010-WW

• Volume / Net Weight: 1.0g
• Thermal Conductivity: 73 Wm / K
• Long Term Operating Temperature: 10 °C -140°C
• Specifications: Applications: CPU / GPU Thermal Thermal Conductivity: 73 Wm / K Specific gravity: 6.24g/cm³ Viscosity: 00021 pas Operating temperature: 10 °C /140°C Content: 5g
• Model #: Conductonaut 1 Gram

Limited time offer, ends 03/01

• Thermal Conductivity: 6.0 W/mK
• Long Term Operating Temperature: -40 to 200 C
• Model #: BL-GJDPX4

• Volume / Net Weight: 12.5W/mK 5g
• Model #: TC-P12505

• Model #: BZ005

• Type: CPU Block
• Model #: BPA-TP1-5G

• Volume / Net Weight: 5.0g
• Thermal Conductivity: 11.0 W/mK
• Long Term Operating Temperature: -150 to 130 C
• Specifications: Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
• Model #: TG-K-015-R

• Model #: ACTCP00091A

• Model #: K-001 Combo

• Volume / Net Weight: 2 x 30ml
• Specifications: Package Specs: 60ml Kit (2 fluid ounces) - 30ml ArctiClean 1 and 30ml ArctiClean 2.
• Model #: ACN-60ML (2-PC-SET)

Limited time offer, ends 03/01

• Thermal Conductivity: 8.5 W/mK
• Features: PTM7950 is a highly thermally conductive Phase Change Material (PCM) that lasts longer and is more effective than tradiational thermal paste. Size 31x50x0.2mm, Phase change at 45°C, Thermal Conductivity: 8.5 W/m.K, It is normal for it to melt at high temperatures.It achieves good heat dissipation performance through repeated melting and solidification.
• Parts: 3 Years
• Model #: BL-DRGJ-3150

• Specifications: Cleaning Wipes for Thermal Paste
• Model #: NA-SCW1

• Model #: CE 001

Limited time offer, ends 03/02

• Volume / Net Weight: 4.0g
• Thermal Conductivity: 14.5W/mK
• Long Term Operating Temperature: -50 to 250 C
• Specifications: The thermal conductivity of CTG10 thermal paste reaches 14.5W/mK, which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into
• Model #: Newegg010

• Model #: C-001 Combo

• Model #: kasia0001