Specifications: Hardware
Audio: Yes
Performance
Maximum Digital Resolutions: 1920 x 1080 (1080p) at 60Hz
Supported Resolutions: 1920 x 1080, 1680 x 1050, 1600 x 1200, 1600 x 900, 1440 x 900, 1366 x 768, 1280 x 1024, 1280 x 720, 1024 x 768
Wide Screen Supported: Yes
Indicators
LED Indicators: 1 x status LED
Power
Power Source: USB-Powered
Environmental
Humidity: 0~80% RH
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Physical Characteristics
Enclosure Type: Steel
Product Height: 0.87"
Product Length: 3.15"
Product Width: 2.05"
Product Weight: 5.36 oz.
Package Contents: 1 x EDID emulator
1 x USB power cable
1 x screw driver
4 x foot pads
1 x quick start guide
Others: Power Supply
Connector (OD x Barrel): 0.22 x 0.10" (5.5 x 2.5 mm)
Supply: 12 VDC, 3 A, auto-switching
Operating Temperature
32 to 104°F (0 to 40°C)
Power Consumption
Maximum 36 W
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA